• UTM Up2Date 9.705 Released

    Today we've released UTM 9.705. The release will be rolled out in phases. In phase 1 you can download the update package from our download server In phase 2 we will make it available via our Up2Date servers to all installations Up2Date Information ...
    • 17 Sep 2020
  • UTM Up2Date 9.607 Released

    Today we've released UTM 9.607. The release will be rolled out in phases. In phase 1 you can download the update package from our download server In phase 2 we will make it available via our Up2Date servers to all installations Up2Date Information ...
    • 17 Sep 2020
  • UTM Up2Date 9.511 Released

    Today we've released UTM 9.511. The release will be rolled out in phases. In phase 1 you can download the update package from our download server In phase 2 we will make it available via our Up2Date servers to all installations Up2Date Information ...
    • 17 Sep 2020
  • UTM Up2Date 9.704 Released

    Today we've released UTM 9.704. The release will be rolled out in phases.

    • In phase 1 you can download the update package from our download server.
    • In phase 2 we will make it available via our Up2Date servers in several stages.
    • In phase 3 we will make it available via our Up2Date servers to all remaining installations.

    Up2Date Information

    News

    • Maintenance Release

    Remarks

    • System will be rebooted
    • Connected REDs will…
    • 5 Aug 2020
  • UTM Up2Date 9.703 Released

    Important Notes

    The initial UTM 9.703 release was pulled back and replaced with a new build (9.703-3), where the code change for "NUTM-11173 [Basesystem] IPsec doesn't re-connect on DHCP interface after firmware upgrade" is reverted. More information and RCA can be found in the KBA at: https://community.sophos.com/kb/en-us/135383.

    The new version of UTM 9.703 is available at our download server.

    There are two…

    • 8 Apr 2020
  • UTM Up2Date 9.606 Released

    Today we've released UTM 9.606. The release will be rolled out in phases.

    In phase 1 you can download the update package from our download server, in phase 2 we will spread it via our Up2Date servers.

    Up2Date Information

    News

    • Maintenance Release

    Remarks

    • System will be rebooted
    • Connected REDs will perform firmware upgrade

    Issues Resolved

    • NUTM-11688 [RED_Firmware] RED50 flash corruption fixes
    • 9 Mar 2020
  • UTM Up2Date 9.702 Released

    Today we've released UTM 9.702. The release will be rolled out in phases.

    In phase 1 you can download the update package from our download server, in phase 2 we will spread it via our Up2Date servers.

    Up2Date Information

    News

    • Maintenance Release

    Remarks

    • System will be rebooted
    • Connected REDs will perform firmware upgrade

    Issues Resolved

    • NUTM-11688 [RED_Firmware] RED50 flash corruption fixes
    • 2 Mar 2020
  • UTM Up2Date 9.701 Released

    Today we've released UTM 9.701. The release will be rolled out in phases.

    In phase 1 you can download the update package from our download server, in phase 2 we will spread it via our Up2Date servers.

    Up2Date Information

    News

    • Maintenance Release

    Remarks

    • System will be rebooted
    • Configuration will be upgraded
    • Connected APs will perform firmware upgrade
    • Connected REDs will perform firmware upgrade

    Issues Resolved

      • 23 Jan 2020
    • UTM Up2Date 9.700 Released

      Hi Everyone,

      Today we've started to release UTM 9.700. The release will be rolled out in phases.

      • In phase 1 you can download the update package from the download area.
      • In phase 2 we will make it available via our Up2Date servers in several stages.
      • In phase 3 we will make it available via our Up2Date servers to all remaining installations.

      What's new in UTM 9.7?

      • Support for new APX Access Points
        In addition to…
      • 30 Sep 2019
    • SUM Up2Date 4.309 Released

      Today we've released SUM 4.309. The release will be rolled out in phases.

      In phase 1 you can download the update package from our download server, in phase 2 we will spread it via our Up2Date servers.

      Up2Date Information

      News

      • Maintenance Release

      Remarks

      • System will be rebooted

      Issues Resolved

      • NSU-315 [Basesystem] TCP SACK PANIC - Kernel vulnerabilities
      • NSU-302 [WebAdmin] Appliance Pictures are missing for new…
      • 24 Jul 2019
    • UTM Up2Date 9.605 Released

      Today we've released UTM 9.605. The release will be rolled out in phases.

      In phase 1 you can download the update package from our download server, in phase 2 we will spread it via our Up2Date servers.

      Up2Date Information

      News

      • Maintenance Release

      Remarks

      • System will be rebooted
      • Connected APs will perform firmware upgrade
      • Connected REDs will perform firmware upgrade

      Issues Resolved

      • NUTM-10885 [Basesystem] Fallback…
      • 24 Jul 2019
    • UTM Up2Date 9.604 Released

      Today we've released UTM 9.604. The release will be rolled out in phases.

      In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

      Up2Date Information

      News

      • Maintenance Release

      Remarks

      • System will be rebooted
      • Connected APs will perform firmware upgrade

      Issues Resolved

      • NUTM-11036 [Kernel] TCP SACK PANIC - Kernel vulnerabilities
      • NUTM-10335 [Wireless…
      • 11 Jul 2019
    • UTM Up2Date 9.603 Released

      Today we've released UTM 9.603. The release will be available to all via our Up2Date servers.

      Up2Date Information

      News

      • Maintenance Release

      Remarks

      • System will be rebooted
      • Configuration will be upgraded

      Issues Resolved

      • NUTM-10932 [AWS, Basesystem] License issue for AWS installations after the upgrading firmware to 9.602
      • 28 May 2019
    • UTM Up2Date 9.602 Released

      Today we've released UTM 9.602. The release will be rolled out in phases.

      In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

      Up2Date Information

      News

      • Maintenance Release

      Remarks

      • System will be rebooted
      • Configuration will be upgraded
      • Connected REDs will perform firmware upgrade

      Issues Resolved

      • NUTM-10728 [Access & Identity] Race condition on…
      • 30 Apr 2019
    • UTM Up2Date 9.601 Released

      Today we've released UTM 9.601. The release will be rolled out in phases.

      In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

      Up2Date Information

      Note

      WAF: TLS session tickets facilitate clients to speed up repeated TLS handshakes by re-using certain cipher parameters. This re-use of cipher parameters can cause encrypted connections to be less secure…

      • 11 Feb 2019
    • UTM Up2Date 9.600 Released

      Hi Everyone,

      Today we've started to release UTM 9.600. The release will be rolled out in phases.

      • In phase 1 you can download the update package from our FTP server.
      • In phase 2 we will make it available via our Up2Date servers in several stages.
      • In phase 3 we will make it available via our Up2Date servers to all remaining installations.

      What's new in UTM 9.6?

      ATP: New Advanced Threat Protection Library

      • Better…

      • 22 Nov 2018
    • UTM Up2Date 9.510 Released

      Today we've released UTM 9.510. The release will be rolled out in phases. In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

      Update: We replaced the update from 9.509 to 9.510 on our FTP server to address two issues. We also uploaded the update for all who have installed the previous one.

      Up2Date Information 9.509 -> 9.510

      News

      • Maintenance …
      • 19 Jul 2018
    • SUM Up2Date 4.308 released

      Hi Everyone,

      We've released SUM 4.308. 

       

      Up2Date Information

      News

      • Maintenance Release

      Remarks

      • System will be rebooted

      Bugfixes

      • NSU-192 - [accd] Missing validation for URL Filtering Categories on empty Sub-Categories
      • NSU-270 - [gateway manager] Import of file extensions for a filter action fails on SUM
      • 30 May 2018
    • UTM Up2Date 9.509 Released

      Today we've released UTM 9.509. The release will be rolled out in phases. In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

      Up2Date Information

      News

      • Maintenance Release

      Remarks

      • System will be rebooted

      Bugfixes

      • NUTM-9619 [Email] CVE-2018-6789: buffer overflow in base64d function in SMTP listener
      • NUTM-9698 [Network] After upgrade to 9.508 in…
      • 26 Mar 2018
    • UTM Up2Date 9.508 Released

      Hi Everyone,

      Today we've released UTM 9.508. The release will be rolled out in phases. In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

      Note:

      • When installing the update packages manually, please make sure to upload both update packages 9.507 and 9.508.
      • S/MIME Encryption updates: This release brings changes to the S/MIME feature to fully conform…
      • 1 Mar 2018
    • UTM Up2Date 9.507 Released

      Hi Everyone,

      We've released UTM 9.507. The release will be rolled out in phases. In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

       

      Up2Date Information

      News

      • Maintenance Release for additional hardware support

      Remarks

      • System will be rebooted

      Bugfixes

      • NUTM-6920 [Basesystem] Support for new SG1xx(w) models

      • NUTM-9174 [WAF] Certificate dropdown…

      • 1 Mar 2018
    • SUM Up2Date 4.307 released

      Hi Everyone,

      Today we've released SUM 4.307. 

       

      Up2Date Information

      News

      • Maintenance Release

      Remarks

      • System will be rebooted

      Bugfixes

      • NSU-252 [accd] SUM not allowing notifications to be pushed to the UTM
      • NSU-254 [accd] Auto-deploy definitions are not auto-deployed
      • 30 Jan 2018
    • Sophos UTM 9.506 on AWS Release Notes

      We're excited to announce that we've just released Sophos UTM 9.506 on AWS. We've added several new features specifically designed for our customers in AWS. With this release, we have introduced the usage of an AWS Profile for deploying OGW, a new update page in WebAdmin, the reduction of permissions needed for Auto Scaling deployments, and included InSpec for checking the health state of a UTM instance. In addition to…

      • 11 Dec 2017
    • UTM Up2Date 9.506 Released

      Hi Everyone,

      Today we've released UTM 9.506. The release will be rolled out in phases. In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

       

      Up2Date Information

      News

      • Maintenance Release

      Remarks

      • System will be rebooted
      • Connected APs will perform firmware upgrade
      • Connected REDs will perform firmware upgrade

      Bugfixes

      • NUTM-8651 [AWS] AWS Permission…

      • 21 Nov 2017
    • UTM Up2Date 9.415 Released

      Hi Everyone,

      Today we've released UTM 9.415. The release will be rolled out in phases. In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

       

      Up2Date Information

      News

      • Security Release

      Remarks

      • System will be rebooted
      • Connected APs will perform firmware upgrade

      Bugfixes

      • NUTM-8987 [Basesystem] System doesn't boot if Posgtresql database cannot start…
      • 9 Nov 2017