Today we've released UTM 9.705-7. The release will be rolled out in phases. In phase 1 you can download the update package from our download server. In phase 2 we will make it available via our Up2Date servers to all installations. Up2Date...

[Note: this post was updated on 15 July 2021 to correct the omission of two resolved issues, on 20 July to advise of potential hardware compatibility issues, and again on 29 July to update a CVE reference] Email protection features in this releas...

Today we've released UTM 9.705. The release will be rolled out in phases. In phase 1 you can download the update package from our download server In phase 2 we will make it available via our Up2Date servers to all installations Up2Date Information ...

Today we've released UTM 9.607. The release will be rolled out in phases. In phase 1 you can download the update package from our download server In phase 2 we will make it available via our Up2Date servers to all installations Up2Date Information ...

Today we've released UTM 9.511. The release will be rolled out in phases. In phase 1 you can download the update package from our download server In phase 2 we will make it available via our Up2Date servers to all installations Up2Date Information ...

Today we've released UTM 9.704. The release will be rolled out in phases.

• In phase 1 you can download the update package from our download server.
• In phase 2 we will make it available via our Up2Date servers in several stages.
• In phase 3 we will make it available via our Up2Date servers to all remaining installations.

Up2Date Information News

• Maintenance Release

Remarks

• System will be rebooted
• Connected REDs will…

Important Notes

The initial UTM 9.703 release was pulled back and replaced with a new build (9.703-3), where the code change for "NUTM-11173 [Basesystem] IPsec doesn't re-connect on DHCP interface after firmware upgrade" is reverted. More information and RCA can be found in the KBA at: https://community.sophos.com/kb/en-us/135383.

The new version of UTM 9.703 is available at our download server.

There are two…

Today we've released UTM 9.606. The release will be rolled out in phases.

Today we've released UTM 9.702. The release will be rolled out in phases.

In phase 1 you can download the update package from our download server, in phase 2 we will spread it via our Up2Date servers.

Up2Date Information News

• Maintenance Release

Remarks

• System will be rebooted
• Connected REDs will perform firmware upgrade

Issues Resolved

• NUTM-11688 [RED_Firmware] RED50 flash corruption fixes

Today we've released UTM 9.701. The release will be rolled out in phases.

In phase 1 you can download the update package from our download server, in phase 2 we will spread it via our Up2Date servers.

Up2Date Information News

• Maintenance Release

Remarks

• System will be rebooted
• Configuration will be upgraded
• Connected APs will perform firmware upgrade
• Connected REDs will perform firmware upgrade

Issues Resolved

…

Hi Everyone,

Today we've started to release UTM 9.700. The release will be rolled out in phases.

• In phase 1 you can download the update package from the download area.
• In phase 2 we will make it available via our Up2Date servers in several stages.
• In phase 3 we will make it available via our Up2Date servers to all remaining installations.

What's new in UTM 9.7?

• Support for new APX Access Points
  In addition to…

Today we've released SUM 4.309. The release will be rolled out in phases.

In phase 1 you can download the update package from our download server, in phase 2 we will spread it via our Up2Date servers.

Up2Date Information News

• Maintenance Release

Remarks

• System will be rebooted

Issues Resolved

• NSU-315 [Basesystem] TCP SACK PANIC - Kernel vulnerabilities
• NSU-302 [WebAdmin] Appliance Pictures are missing for new…

Today we've released UTM 9.605. The release will be rolled out in phases.

In phase 1 you can download the update package from our download server, in phase 2 we will spread it via our Up2Date servers.

Up2Date Information News

• Maintenance Release

Remarks

• System will be rebooted
• Connected APs will perform firmware upgrade
• Connected REDs will perform firmware upgrade

Issues Resolved

• NUTM-10885 [Basesystem] Fallback…

Today we've released UTM 9.604. The release will be rolled out in phases.

In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

Up2Date Information News

• Maintenance Release

Remarks

• System will be rebooted
• Connected APs will perform firmware upgrade

Issues Resolved

• NUTM-11036 [Kernel] TCP SACK PANIC - Kernel vulnerabilities
• NUTM-10335 [Wireless…

Today we've released UTM 9.603. The release will be available to all via our Up2Date servers.

Up2Date Information News

• Maintenance Release

Remarks

• System will be rebooted
• Configuration will be upgraded

Issues Resolved

• NUTM-10932 [AWS, Basesystem] License issue for AWS installations after the upgrading firmware to 9.602

Today we've released UTM 9.602. The release will be rolled out in phases.

In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

Up2Date Information News

• Maintenance Release

Remarks

• System will be rebooted
• Configuration will be upgraded
• Connected REDs will perform firmware upgrade

Issues Resolved

• NUTM-10728 [Access & Identity] Race condition on…

Today we've released UTM 9.601. The release will be rolled out in phases.

In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

Up2Date Information Note

WAF: TLS session tickets facilitate clients to speed up repeated TLS handshakes by re-using certain cipher parameters. This re-use of cipher parameters can cause encrypted connections to be less secure…

Hi Everyone,

Today we've started to release UTM 9.600. The release will be rolled out in phases.

• In phase 1 you can download the update package from our FTP server.
• In phase 2 we will make it available via our Up2Date servers in several stages.
• In phase 3 we will make it available via our Up2Date servers to all remaining installations.

What's new in UTM 9.6? ATP: New Advanced Threat Protection Library

• Better…

Today we've released UTM 9.510. The release will be rolled out in phases. In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

Update: We replaced the update from 9.509 to 9.510 on our FTP server to address two issues. We also uploaded the update for all who have installed the previous one.

Up2Date Information 9.509 -> 9.510 News

• Maintenance …

Today we've released UTM 9.509. The release will be rolled out in phases. In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

Up2Date Information News

• Maintenance Release

Remarks

• System will be rebooted

Bugfixes

• NUTM-9619 [Email] CVE-2018-6789: buffer overflow in base64d function in SMTP listener
• NUTM-9698 [Network] After upgrade to 9.508 in…

Hi Everyone,

Today we've released UTM 9.508. The release will be rolled out in phases. In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

Note:

• When installing the update packages manually, please make sure to upload both update packages 9.507 and 9.508.
• S/MIME Encryption updates: This release brings changes to the S/MIME feature to fully conform…

Hi Everyone,

We've released UTM 9.507. The release will be rolled out in phases. In phase 1 you can download the update package from our FTP server, in phase 2 we will spread it via our Up2Date servers.

 

Up2Date Information News

• Maintenance Release for additional hardware support

Remarks

• System will be rebooted

Bugfixes

• NUTM-6920 [Basesystem] Support for new SG1xx(w) models

• NUTM-9174 [WAF] Certificate dropdown…

Hi Everyone,

Today we've released SUM 4.307. 

 

Up2Date Information News

• Maintenance Release

Remarks

• System will be rebooted

Bugfixes

• NSU-252 [accd] SUM not allowing notifications to be pushed to the UTM
• NSU-254 [accd] Auto-deploy definitions are not auto-deployed

We're excited to announce that we've just released Sophos UTM 9.506 on AWS. We've added several new features specifically designed for our customers in AWS. With this release, we have introduced the usage of an AWS Profile for deploying OGW, a new update page in WebAdmin, the reduction of permissions needed for Auto Scaling deployments, and included InSpec for checking the health state of a UTM instance. In addition to…