How setup UTM 9 with SlingStudio

Do you have web filtering or application control enabled? Try disabling while setting up to see if we can isolate the problem. 

Thanks,
Karlos

Do you have web filtering or application control enabled? Try disabling while setting up to see if we can isolate the problem. 

Thanks,
Karlos

I put SlingStudio's IP address in Application Control Skiplist to pass by. It should not block.

Francis

Let me show what I setup firewall with slingStudio. No block ports or web control.

SlingStudio used DHCP, (there is no manual IP address option) I assigned it to 172.16.0.94 and MAC address and named it as "SlingStudio"

SlingStudio-> 172.16.0.94 -> MAC addresses in Network Definition

Network Protection -> Firewall -> SlingStudio -> Any -> Any             (I set all ports open for SlingStudio outbound.)

Web Protection -> Application Control -> Advanced -> Skip Hosts/Nets -> SlingStudio     (No Web Control)

I can access any web sites via SlingStudio via iPad. SlingStudio act as "bridge" to iPad.

But I cant get "upload test" work. It failed to pass test.

I logging it and I notice I have lot of error messages repeatly: "12:00:00    Default DROP     UDP    172.16.0.94:50015 -> 172.16.0.1:47600"   What is heck is port 47600? and why SlingStudio calling to our Sophos firewall server?

Francis

Hi Francis,

Thanks for sharing that. Could you also create a FW rule in the opposite direction for SlingStudio (inbound: Any -> Any -> SlingStudio) and test?

Thanks,
Karlos

Never mind. I found a problem. Above I setup is correct. However I found some inbounds need to setup. I have to add interface address and DNAT to SlingStudio. (It treat as "server" with any ports.) Now it working. Ignored upload test. But you will able to go live in facebook and youtube. It have been solved. Thank you for myself to solved it.

Francis

Glad issue is resolved and thanks for sharing solution!

Cheers,

Karlos