Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 19 replies
  • Answers 1 answer
  • Subscribers 42 subscribers
  • Views 63758 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Integrating an XG210 with an existing Ubiquiti Unifi Network with multiple VLANs.

Paul Schwegler

I am trying to integrate an XG210 into an existing network. The network is a full Ubiquiti Unifi setup and has multiple VLANs set up between the gateway and the switch. I would think I could place the XG in line on a trunk connection between the switch and the gateway. The end goal is to be able to filter the individual networks separately in regards to web filtering and scanning etc.

I have asked this question before and got a lead: "You would have to set up virtual interfaces for all the VLANs and bridge them accordingly." But was unsuccessful in making this work.

I am new to the XGs having come from sonicwall, so I am still a bit green when it comes to using the XG software. Can anyone give me a bit more detailed instructions, or at least a link or two to something to help me figure this out? Any help will be appreciated.



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to Paul Schwegler

     I found this old thread.  I'm also using Unifi access points.  Although, in my setup, it's Modem (Fiber), Sophos XG Firewall, HP 1810 switch, and Unifi APs.  I use Unifi Controller on my NAS as controller.  

    My question is, why are you using USG Pro 4?  Is this still needed?  Currently in mine, modem goes straight to Sophos XG.  

    Thanks, hope to hear your reply.

  • 0 in reply to jang430

    I don't need to use a USG, in fact it's kind of a pain in the butt because I have to disable NAT. But, I needed to create a unified standard (pun intended) for my company because all of my junior techs need to be able to be trained on the system.  A cheap USG is a small price to pay for a well-functioning and easy to troubleshoot and configure system.

    Plus I get all the green circles in the dashboard LOL

  • 0 in reply to Paul Schwegler

    "Plus I get all the green circles in the dashboard LOL"

    True :-). Thanks for the clarification.

Unfiltered HTML