Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

IPSEC VPN Routing traffic between multiples sites

Hi,

We need to establish a multiple site to site IPSEC VPN with a XG86w as the HQ.

Both remote sites have a TELTONIKA RUT240 router.

I am able to ping from HQ both remote sites, and from each remote site the HQ, but can’t ping a remote site from another remote site.

 

In the XG86w I have in the local subnet of each tunnel the local HQ network and the local network of the other remote site.

 

On the TELTONIKA RUT240 side, running ipsec status we can see that both are installed.

I'm clearly missing something.

Any help would be appreciated.

 

Alexandre



Added TAGs
[edited by: Raphael Alganes at 3:26 PM (GMT -7) on 7 Oct 2024]
Parents Reply
  • Please get in touch with me, need to have a call to understand your topology and requirement. If not, you may have to raise a support case.

    Pinging between hosts of two spoke remote sites without having IPsec tunnel between them and via hub site (SFOS) does not work straight away as Ipsec is point to point; there could be work arounds to achieve this by having NAT configs on SFOS and via using some CLIs.

    Other option is to use route based IPsec and BGP to achieve this if the other vendor supports.

Children