How to monitor WAN and VPN outages?

You could configure a SD-WAN Gateway and Profile without using it. 

It will ping / monitor whatever you want and how often you want and giving you SD-WAN Reports of up/downtimes. 

Great idea! 

As I do not know SD-WAN, just double checking what to do to just monitor:

• Where I create SD-WAN Gateway? Under SD-WAN Route, or under Gateways?
•  Inder SD-WAN PROFILES, I probably create new profile, select that only one WAN Gateway I have...what about lower section, which says about deactivating gateway? I do not want the only WAN gateway to be ever deactivated.

Hi Andrej,

You may check the following KB's for SD-WAN for more information.

• SD-WAN

Hi Andrej,

You may check the following KB's for SD-WAN for more information.

• SD-WAN

Thank you, but there is no caption like "Create SD-WAN just for monitoring purposes", unfortunatelly. I do not want to create real SD-WAN, because I only have one single internet link.I just want to create part of SD-WAN, barely enough to just have graph and monitoring of Up/Down states of PPPoE internet link, as LuCar Toni  suggested. But I do not want to setup too much or cause troubles.

Gateways and SD-WAN Profiles are completely out of affect, as long as you are not using them in a SD-WAN Route. So you can setup a SD-WAN Profile with many Gateways, using the monitoring technique you want.