v19 VMware disk usage, reporting full

This could be:  NC-94291

Fixed in MR1. 

I think and believe that this problem (NC-94291) is fixed in build 350. But it is possible to correct this problem on a "live system"? When we updated another firewall, the /var filesystem REMAIN small. I have found some info about "increasing /var size" in https://support.sophos.com/support/s/article/KB-000036775?language=en_US. It is worth trying this after update? Or do we have reinstall XG firewall again and restore config from backup?

Hi,

Are there any suggestions for this yet?
We are also affected and have 5 productive instances!

SFOS 19.0.1 MR-1 build350 is not available as install image and seems to be withdrawn today also as update???

We need a way of repair without reinstalling!

BR Gerd

Hi,

Are there any suggestions for this yet?
We are also affected and have 5 productive instances!

SFOS 19.0.1 MR-1 build350 is not available as install image and seems to be withdrawn today also as update???

We need a way of repair without reinstalling!

BR Gerd

It is fixed in MR1. The Build Version does not matter. You should have access to V19.0 MR1 in your Licensing Portal. community.sophos.com/.../sophos-firewall-v19-mr1-re_2d00_release-build-365-is-now-available

Hi Lucar,

19.0.1 MR-1 is available as an update, but NOT as an installation media.
But if you click on "check for updates" in a firewall today, it says "no update available". That was different yesterday!

On the other hand you answeresat not my question!

The update does not fix the error with the var directory!

So the question remains:
How can the problem be fixed without reinstalling??

I opened a case regarding this issue (NC-94291)

BR Gerd

This could be related to V19.0 MR1. See: https://community.sophos.com/sophos-xg-firewall/b/blog/posts/sophos-firewall-v19-mr1-re_2d00_release-build-365-is-now-available

There are two fixes: 

NC-100679 & NC-94291

So you can update your current installation to V19.0 MR1 and try it. The Respin version fixed another issue, which could potentially caused this issue. 

Hi Toni, thank you for quick response. I need to explain your "... try it...". You mean - after update the /var would be "expanded" after update will have finished? Or we need export-reinstall-import? Or you don´t know and mean "maybe the /var size changed after reinstall"?

As I wrote: The update does not fix the error with the var directory!

Of course I checked before I wrote that!

SFVUNL_KV01_SFOS 19.0.1 MR-1-Build365# df -h
Filesystem                Size      Used Available Use% Mounted on
none                    613.2M      1.5M    567.0M   0% /
none                      1.9G     24.0K      1.9G   0% /dev
none                      1.9G     51.7M      1.9G   3% /tmp
none                      1.9G     14.6M      1.9G   1% /dev/shm
/dev/boot               127.7M     34.3M     90.7M  27% /boot
/dev/mapper/mountconf
                        560.3M     72.0M    484.3M  13% /conf
/dev/content             11.8G    496.1M     11.3G   4% /content
/dev/var                  3.7G      1.5G      2.2G  41% /var

We are not increasing the the /var/ because there is no reason to do. But 41% is actually fine from my perspective. /var/ is rarely used. 

This Firewall is brandnew (installed yesterday)

And we have another that is 3 weeks old, there it is on 100 %!

Sorry Luca, please don't think I'm stupid, but your answer is simply wrong.

There is an nc-94291 for this issue and you try to say 41% is fine........

Here is an example how it should be. (appliance has been updated from 18.x)

SFV1C4_SO01_SFOS 19.0.0 GA-Build317# df -h
Filesystem                Size      Used Available Use% Mounted on
none                    231.4M     12.6M    202.6M   6% /
none                      1.9G     20.0K      1.9G   0% /dev
none                      1.9G     21.5M      1.9G   1% /tmp
none                      1.9G     14.6M      1.9G   1% /dev/shm
/dev/boot               127.7M     50.0M     75.0M  40% /boot
/dev/mapper/mountconf
                        385.4M     73.1M    308.3M  19% /conf
/dev/content              3.6G    601.6M      3.0G  16% /content
/dev/var                 29.9G      8.6G     21.3G  29% /var

IT IS reason.!!

We have "consistently" only 5%-10% free. Sophos report this nearly every day as errors. AND our monitoring system report this permanently. AND we keep losing reports older than several days. AND email system sometimes refuse sending bigger emails. AND we have aloocated 80GB disc for 4 GB /var. AND....

SFV4C6_VM01_SFOS 19.0.0 GA-Build317# df -h
Filesystem                Size      Used Available Use% Mounted on
none                    640.6M     11.6M    582.3M   2% /
none                      2.9G     24.0K      2.9G   0% /dev
none                      2.9G    968.3M      2.0G  33% /tmp
none                      2.9G     14.7M      2.9G   0% /dev/shm
/dev/boot               127.7M     26.6M     98.4M  21% /boot
/dev/mapper/mountconf
                        560.3M     95.4M    460.9M  17% /conf
/dev/content             11.8G    493.8M     11.3G   4% /content
/dev/var                  3.7G      3.3G    328.9M  91% /var

Ok lets rephrase this. 

It is another problem, you are facing. 

So the disk is not increasing due an issue. Instead the size of your partition is to small. This has nothing to do with any of the IDs i called. The IDs are tackling issues, which increases the amount of data stored and resolve this.

But if you partition is not utilizing the proper disk size, this is an different issue. You can follow up on this one with support. 

"Instead the size of your partition is to small."

primary disk 16 GB
secondondary 80 GB (as recommended by Sophos)

I do not feel taken seriously here!

We have more than 170 firewalls online, so you can assume some experience.

Please verify your own Post on https://community.sophos.com/sophos-xg-firewall/sfos-v19-early-access-program/f/discussions/133616/v19-hyperv-disk-usage-reporting-full

Gerd