is it possible to change the interface of vlan?
i got currently all on the same port, we want to switch now to new glass fiber modul (bought later/now), but if edit a vlan the interface got no option to change it.
This should be possible like switch or not? Changing Untagged and tagged like i want? Please i dont want change many many vlan, since the only option i see is do recreate them, and that means i need remove the zones, the dhcp relays and and ...
Hello Simplified Sam,Thank you for reaching out to the community, when editing the VLAN only the following options can be changed at any time:1.) Name2.) Zone3.) IP assignment4.) IPv4/netmaskThe "Hardware" cannot be changed, you'll need re-create the VLAN on that desired interface !!
Thanks & Regards,_______________________________________________________________
Vivek Jagad | Technical Account Manager 3 | Cyber Security Evolved
Sophos Community | Product Documentation | Sophos Techvids | SMSIf a post solves your question please use the 'Verify Answer' button.
Not sure how other companys split up their vlans, but if this is the way to go, i cant recommend sophos anymore.
I think this problem still exist many years. You basically saying i need recreate my 20-30 vlans where i setup evrything. I dont want think about it!
Simplified Sam,Interface / VLAN Migration via XML Import/Export: https://community.sophos.com/sophos-xg-firewall/f/recommended-reads/123684/interface-vlan-migration-via-xml-import-exportAs some of you want to move the VLAN configuration or Interface configuration in XG from one interface to another, there is no way to do this in the GUI. So you could use the Import/Export feature in XG, to perform this operation.
This is suitable solution, thanks. Not Sure why you cant do this today with gui, but hey you get what you get for your money ...
Two things i dont unterstand:
1. Why you need to unbind port 3? On Port 3 alone, let say i got my default Subnet.
2. i am correct this method just prompt import the config part i need, could i damage my config if i would format my file wrong, like i make to many whitespaces?
Hey Simplified Sam,Port3 is just given as an example in the mentioned article. Basically for example if you have Port2 where all the VLAN are configured then Unbind Port2 to avoid any overlaps and errors in regards to subnet. And again before going for the changes, it is advised to take a complete back up of the appliance and then perform according to the steps shared in the article !!
Whats the difference export all and the backup file? The encryption with a password?
Simplified Sam,With Import/Export feature: You can import and export the full or partial configuration of Sophos Firewall.KBA1: https://docs.sophos.com/nsg/sophos-firewall/19.0/Help/en-us/webhelp/onlinehelp/AdministratorHelp/BackupAndFirmware/ImportExport/index.htmlWith Backup/restore feature: You can take a backup/restore entire configuration on Sophos Firewall along with encryption.KBA2: https://docs.sophos.com/nsg/sophos-firewall/19.0/Help/en-us/webhelp/onlinehelp/AdministratorHelp/BackupAndFirmware/BackupAndRestore/index.html
with export / import you can modify and specify what you import. You cannot do this with a full backup restore.
it is quite handy for dealing with large lists of host imports or in this case here - as workaround to modify VLAN interfaces.