POint to Point Wireless Link

Nidz,

I guess you have a cable that comes out from the point to point otherwise you cannot use the link.

Once you have the port, configure an empty port on XG and use this as the main wan.

Regards

Hi Iferrara,

Yes...Link already establish but my concern regarding the routing.

I have already the idea to put it in WAN interface but my concern the routing, how i will redirect the packet from the branch to the head office?

Hope you can give me guide or steps since im  new in the firewall world.

Nidz

Nidz,

Upload a network map so I can help you.

Hi Iferrara,

Here im uploading the context of the network map.

Services they need to access are Telnet and ERP.

I just want to accomplished this scenario.

Thanks,

Nidzpar

NIdz,

from the headquarter, do you reach XG330 LAN ip?

From the branch office, do you reach XG230 LAN ip?

IF yes in both cases, you only need to add:

on XG330, route to VLAN1, VLAN2, VLAN 3 via XG230 LAN IP

on XG230, route to servers via XG 330 LAN IP

Regards

Hi Nidzpar Mohammad Sali1 

You can terminate the link to your branch office and you have to configure the default route pointing towards Head office and you have to add Routes in Head office and branch office and in Head office create firewall rule where the P2P link is terminated to WAN zone to access the Internet.