Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 40 subscribers
  • Views 1342 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Fail over to remote site WAN connection

BRCIT BRC

Dear  Experts

I need some direction on below WAN fail over scenario

 

We have 2 sites links VIA Ubiquity Air Fibre (PTP) the main site is consist with 2xXG330 (SFOS 17.5.8 MR-8) with HA ,and the second site has Mikrotick CCR  all the routing occurred at SOPHOS end, the Mikrotik mange local VLANS/Subnets/DHCP on the 2nd site .

Currently there is no WAN connection at the 2nd Site all the WAN request comeback to SOPHOS via PTP link (and yes we do have asymmetric routing)

 

On the Main site we have 1Gbps as our Main WAN link on SOPHOS interface and have 20mbps EFM as the backup WAN. The PTP Bridge is connected to the SOPHOS LAN interface same as other devices on the main site (IP alias)

Recently we did installed a another WAN connection (400mbps) at the 2nd Site as a backup, the connection is configured at Mikrotik Router interface and we can ping the IP and the Gateway from the Main site.

We would like to use this 2nd WAN connection as our fail-over connection for both the sites now, We would like to route all the traffic via SOPHOS hence what is the best way to route traffic from SOPHOS to 2nd wan connection on remote site on Mikrotik interface . Hope this make sense .

Have attached a network diagram that simulate the site

 

Thanks in Advanced

Andy

 

 

 

 



This thread was automatically locked due to age.
Parents Reply Children
No Data
Unfiltered HTML