Dear Experts
I need some direction on below WAN fail over scenario
We have 2 sites links VIA Ubiquity Air Fibre (PTP) the main site is consist with 2xXG330 (SFOS 17.5.8 MR-8) with HA ,and the second site has Mikrotick CCR all the routing occurred at SOPHOS end, the Mikrotik mange local VLANS/Subnets/DHCP on the 2nd site .
Currently there is no WAN connection at the 2nd Site all the WAN request comeback to SOPHOS via PTP link (and yes we do have asymmetric routing)
On the Main site we have 1Gbps as our Main WAN link on SOPHOS interface and have 20mbps EFM as the backup WAN. The PTP Bridge is connected to the SOPHOS LAN interface same as other devices on the main site (IP alias)
Recently we did installed a another WAN connection (400mbps) at the 2nd Site as a backup, the connection is configured at Mikrotik Router interface and we can ping the IP and the Gateway from the Main site.
We would like to use this 2nd WAN connection as our fail-over connection for both the sites now, We would like to route all the traffic via SOPHOS hence what is the best way to route traffic from SOPHOS to 2nd wan connection on remote site on Mikrotik interface . Hope this make sense .
Have attached a network diagram that simulate the site
Thanks in Advanced
Andy
This thread was automatically locked due to age.
