Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 2 subscribers
  • Views 3787 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

CRLoader Invalid appliance:Invalid appliance: Hardware checksum mismatch

Leonel Zenil

my cyberoam CR 100iNG

I need help. I try to recover the password through CRLoader. But when I select 0  CRLoader in CLI mode it show error Invalid appliance: Hardware checksum mismatch



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to MayurMakvana 
    I could thank you...


    Via console using PuTTY

    This is applicable for Sophos Firewall 17.5 and later.
    1. Sign in using PuTTY.
    2. Enter the incorrect password for the initial prompt.
    3. Enter the uppercase command RESET in the second password prompt.
    4. Select 4. Reset password for admin user.
    5. Enter y and press Enter.
    ......
    IN MY cyberoam (CR 100iNG) there is no option 4

select option 3

everything is reset
    USER:admin
    PASS:admin

    I HOPE IT HELPS
     
  • 0 in reply to Leonel Zenil

    Hello,

    Connect the firewall on serial console and at password prompt type RESET and press enter. It may prompt you with multiple option to reset the device. As far as I remember - it also have option to reset password.

    See if the above help!

    Mayur Makvana
    Technical Account Manager | Sophos Technical Support
    Sophos Support Videos | Knowledge Base  |  @SophosSupport | Sign up for SMS Alerts |
    If a post solves your question please use the 'Verify Answer' button.

Unfiltered HTML