This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing between two networks in Sophos home UTM 9.3

Hi,

So far with the Sophos community help I was able to fix the issues with my Home UTM configuration.

Now, I got another issue.

My Cable Internet router is in 192.168.0.1 range. So all my WiFi devices get that range.

My Sophos UTM LAN IP is in 172.17.0.1 range.

How/where do I create a route between these two IP ranges so that my LAN can talk to my WiFi.

I tried disabling the WiFi on the Cable router and connect another ADSL (Old router). assign the IP in 172 range.

But the problem is the Cable router is giving 34 MBPS on WiFi. If I connect the Old ADSL I am only getting 2.5 MBPS.

I don't want to buy another AP because of this.

If I can create a Route between 192 and 172 IP ranges the problem will be fixed.

Thank you,

Krishna



This thread was automatically locked due to age.
Parents Reply Children
  • Hi Krishna,

    UTM and WiFi is directly connected to each other, so I think you need to make some configuration changes in your WiFi router if you are not able to communicate between both subnet.

    Make a Firewall rule for eg: LAN - ANY - WiFi & WiFi - Any - LAN.

    Thanks

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

  • Just tried that.

    I don't see the Firewall option in my ADSL. It's Netgear CG3100D-2.

    Also tried with a old TP-Link TL-W5110G access point In AP mode. 

    Still getting 1.5 MBPS speed. Can it be problem with the PC I am using as UTM?

    Just a thought but the laptop directly connected to the UTM is getting 34MBPS speed.

    Thank you,

    Krishna