Routing between two networks in Sophos home UTM 9.3

Hi Krishna,

Welcome back.

Create a firewall rule, 172.x -ANY- 192.x and vice-versa or deploy WiFi in a bridge mode.

Thanks

Hi Krishna,

Welcome back.

Create a firewall rule, 172.x -ANY- 192.x and vice-versa or deploy WiFi in a bridge mode.

Thanks

Hi Sachin,

Thank you for the reply.

I think I already got the firewall rule. Please see below image.

I don't have a separate AP that I can use. the ADSL 2+ router is not giving good speed.

is there any way that I can create a static rule in the UTM for both subnets.

Thank you,

Krishna

Hi Krishna,

In the rules, the defined WAN(network) should be WAN (address). These rules are defined for LAN to WAN communications. I need a descriptive network diagram to understand and assist you further.

Thanks

Hi Sachin,

Not sure how to change the WAN(Network) to WAN(Address) as I am hovering mouse to WAN (Network) it is showing my WAN address. So I thought both are same.

below is the network Diagram.

Original Plan:

Current:

Please let me know if you need any more details.

Thank you,

Hi Krishna,

UTM and WiFi is directly connected to each other, so I think you need to make some configuration changes in your WiFi router if you are not able to communicate between both subnet.

Make a Firewall rule for eg: LAN - ANY - WiFi & WiFi - Any - LAN.

Thanks

Just tried that.

I don't see the Firewall option in my ADSL. It's Netgear CG3100D-2.

Also tried with a old TP-Link TL-W5110G access point In AP mode. 

Still getting 1.5 MBPS speed. Can it be problem with the PC I am using as UTM?

Just a thought but the laptop directly connected to the UTM is getting 34MBPS speed.

Thank you,

Krishna