VPN IPSEC and NAT

Hello papali ,

Good day and thanks for reaching out to Sophos Community.

You may follow this KBA for the UTM side: https://support.sophos.com/support/s/article/KB-000034290?language=en_US

These steps need not only apply to tunnels between two UTMs; use the same configuration to set up VPN tunnels to other devices that use the same local network ranges as UTMs, as long as the device on the other end is configured in the same manner.

But please verify with the other end all the necessary configurations before applying.

Cheers,

Hello papali ,

Good day and thanks for reaching out to Sophos Community.

You may follow this KBA for the UTM side: https://support.sophos.com/support/s/article/KB-000034290?language=en_US

These steps need not only apply to tunnels between two UTMs; use the same configuration to set up VPN tunnels to other devices that use the same local network ranges as UTMs, as long as the device on the other end is configured in the same manner.

But please verify with the other end all the necessary configurations before applying.

Cheers,

Raphael Alganes  Thank you so much for your reply! I will try asap.

Thanks again!

Raphael Alganes It worked!, on the other side was a CISCO ASA.

Thanks again!

Hello papali ,

Thanks for taking the time to provide an update. We're glad to know it worked for your side.

Hope you have a nice day and thank you for choosing Sophos.

Regards,