Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 14 subscribers
  • Views 2093 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

unclear status of access points

GernotMeyer

Hi all,

I have 3 AP6 420 managed by Central. FW is 1.4.1819 (actual).

1. Question: The Dashboard says, that 1 AP is unconfigured. What does it mean and how to change that?

2. Question: in Access Point List: 1 AP is "up to date", 2 APs are waiting to update since days. How to force an update? Reboot doesn't solve.

3. Question: I want to mesh the APs, because 1 AP is unable to get connected via cable. Therefore I created a mesh network with 2 APs. I want to add the 3rd AP. But after config the system says "Your mesh network has now configured. Click save". but save button is greyed out... So I cannto save. No error message is available...

any hints?

Thanks

Gernot



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to emmosophos

    Just to get back to some of those points: 
    Unconfigured means basically no SSID attached to the AP. Could that be the case? 

    Once the Mesh SSID is configured with two APs, users can add the third AP from “Accesspoint” page.
    Currently user cannot assign the Mesh SSID to an AP from SSID page once mesh SSID is saved.

    __________________________________________________________________________________________________________________

Children
No Data
Unfiltered HTML