Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 15 subscribers
  • Views 6695 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

same SSID with different RADIUS-Servers?

dirkkotte

Hi all,
is there an option to use the same SSID with different RADIUS-Servers in Central Wireless + AP6 ?
We have to configure the same SSID for all locations ... but should use local RADIUS-Servers (we have Latency of nearly 1000msec to some locations ...)
Worked with SG / XGS and APX connected to Firewall.

Thx Dirk



This thread was automatically locked due to age.
Parents
  • 0

    This is not possible at the moment without a nat trick.

    you could do per site a Dnat and translate the ip per side.

    __________________________________________________________________________________________________________________

  • 0 in reply to LuCar Toni

    Hi Lucar,

    ap6 is a serious problem for us, because we have one global EMEA, US, ASIA predefined SSID "COMPANY-INTERNAL" on our 3000 notebooks. They authenticate via wpa2-enterprise to locally installed ms nps radius server. Unfortunatly in different VLANs. Additonally and we have aps behind 80 red boxes which use this SSID untagged (aplan). 

    This works very well and I really like SFOS for that.

    The world could be easy, if you implement the same feature in sophos central as in sfos, that one can have different wlan objects with the
    same SSID, but different VLAN, radius settings.

    I fear, without a quick solution for that I'm forced to replace sophos wireless with aruba wireless within the next months.

    regards

    Thomas

Reply
  • 0 in reply to LuCar Toni

    Hi Lucar,

    ap6 is a serious problem for us, because we have one global EMEA, US, ASIA predefined SSID "COMPANY-INTERNAL" on our 3000 notebooks. They authenticate via wpa2-enterprise to locally installed ms nps radius server. Unfortunatly in different VLANs. Additonally and we have aps behind 80 red boxes which use this SSID untagged (aplan). 

    This works very well and I really like SFOS for that.

    The world could be easy, if you implement the same feature in sophos central as in sfos, that one can have different wlan objects with the
    same SSID, but different VLAN, radius settings.

    I fear, without a quick solution for that I'm forced to replace sophos wireless with aruba wireless within the next months.

    regards

    Thomas

Children
Unfiltered HTML