Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 14 subscribers
  • Views 8664 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Try to add AP to SSID: There is an Access point that does not support this SSIDs frequency.

dirkkotte

Hi all,

In central / wireless, i've configured a simple SSID and try to add an AP6 420 .
Got the message
"There is an Access point that does not support this SSIDs frequency."
AP is configured for Germany (2,4 + 5 GHz)
Where is my error?



This thread was automatically locked due to age.
Parents
  • +1

    Check the AP itself. Likely it claims, not enough power. 

    Then follow up with this: https://support.sophos.com/support/s/article/KB-000045707?language=en_US

    __________________________________________________________________________________________________________________

  • 0 in reply to LuCar Toni

    ok, AP's are prepared, but offline currently.
    I asked the customer to try to connect one.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0 in reply to dirkkotte

    device-log:

    Jan 1 00:01:20 localhost local1.info systemd: [S1]: [admin]: Warning: AP is powered on insufficient power (12.95W) operating in AF mode.
    Jan 1 00:01:20 localhost local1.info systemd: [S1]: [admin]: (12.95W) 1. All radios disabled 2. Alert on web page for insufficient power
    Jan 1 00:01:20 localhost local1.info systemd: [S1]: [admin]: Warning: AP is powered on insufficient power: 12.95W


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0 in reply to dirkkotte

    Did you check the KB above? There could be LLDP in place or something reports the AF Mode to the Access Point. 

    __________________________________________________________________________________________________________________

Reply Children
  • 0 in reply to LuCar Toni

    The network team reviews the requirements and configuration.
    I forwarded the KB article.
    Thanks!


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Unfiltered HTML