Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 7299 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG and AP10 how to get 40mhz channels

IanMorehouse

I have an AP10 connected to my home XG. The maximum connection speed shown is 65mb/s.

I know how to change UTM AP settings, but not how to get 40mhz channels from an XG? On a UTM I can achieve 150mb/s connections.

Your thoughts and suggestions please?



This thread was automatically locked due to age.
Parents
  • 0

    Hi Ian,

    As you are using AP 10, 2.4 GHz frequency band is default settings. This band will utilize channel widths: 20, 40 MHz, the Access Point will automatically transmit on the least used channel.

    Thanks

    Sachin Gurung

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

  • 0 in reply to sachingurung

    Okay, I will shut down my fulty AP55c and see if that improvs the throughput on the AP10 connected the XG.

    While the speed is not important for web browsing link to slow, it is impoirtant for file saving and backups.

    Work have supplied me with an opposition AP and it runs rings around the AP10. I hope when I get my replacement AP50 I will get better connection speed.

    Ian,

    home UTM 9.x running in ESXi 6 e3-1275v2

    AP55c and AP10 (courtesy Astaro)

    Three other UTMs, SUM and SFM in hibernation

    XG 15.x MR3 in hibernation

Reply
  • 0 in reply to sachingurung

    Okay, I will shut down my fulty AP55c and see if that improvs the throughput on the AP10 connected the XG.

    While the speed is not important for web browsing link to slow, it is impoirtant for file saving and backups.

    Work have supplied me with an opposition AP and it runs rings around the AP10. I hope when I get my replacement AP50 I will get better connection speed.

    Ian,

    home UTM 9.x running in ESXi 6 e3-1275v2

    AP55c and AP10 (courtesy Astaro)

    Three other UTMs, SUM and SFM in hibernation

    XG 15.x MR3 in hibernation

Children
No Data
Unfiltered HTML