Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 2 replies
  • Subscribers 40 subscribers
  • Views 20577 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cant access XG85w anymore, Pingable but no web or console access possible

ZdenkoRendic

Hello

I started the initial Setup on port 1 for the XG85w, the Setup was done, I activated DHCP for Port 1, ive got an DHCP IP ( 192.168.1.10 has the Firewall) and everything was fine. I rebootet the Firewall and after that, I cant access the Firewall anymore. 

1. it fails over  Web:

http:\\192.168.1.10:80
https:\\192.168.1.10:80
http:\\192.168.1.10
https:\\192.168.1.10
http:\\192.168.1.10:4444
https:\\192.168.1.10:4444

I can ping it.

2. it Fails over the console:

when I connect with Putty, speed 38400 or 9600, the Screen is just black I dont see any creditals.

then I press ctrl + c and it says :Authentification fails", and it wants just a passwort from me.

I dont rember seting any console Passwords, Tryed following passwords:

-admin
-1234
-the password I set for web

and all fails, cant log in into the console.

I pressed the "Reset" button for around 10 secounds, rebootet, tryed again several times, but it did not reset really, It still gives me the DHCP I have set up ( 192.168.1.xxx)

Please, how can I access the Device again ? is there any other way Reseting the Device with the reset Button ?

Best Regards

Zdenko



This thread was automatically locked due to age.
Parents
  • 0

    Zdenko,

    once your are connected to XG using putty (serial cable) you should be able to enter the password configured on web interface. If this does not work, reboot the appliance and keep pushing Enter button. You will get the SF loader and using the first option you are able to reset the admin password to default value.

  • 0 in reply to lferrara

    Hello Lferrara

    You helped me, thx! Its impotant to reboot the XG85w while connected with the serial cable and putty with speed 38400, then Pressing "enter" Ive got 3 choises ( 0, 1 and 2). Pressed 0, could reset Console Password to default( defaultis: admin) and after reboot and entering console normaly, under the Point 5 I could reset the whole thing to default settings.

Reply
  • 0 in reply to lferrara

    Hello Lferrara

    You helped me, thx! Its impotant to reboot the XG85w while connected with the serial cable and putty with speed 38400, then Pressing "enter" Ive got 3 choises ( 0, 1 and 2). Pressed 0, could reset Console Password to default( defaultis: admin) and after reboot and entering console normaly, under the Point 5 I could reset the whole thing to default settings.

Children
No Data
Unfiltered HTML