Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 1599 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos Home to replace Arista Home Pro

James Pifer

Hello. I'm looking at replacing my current Arista Home Pro with Sophos Home. A couple important features I use are TunnelVPN and Bypass.

Can Sophos do a site-to-site vpn to Torguard ?

Can you control access through the VPN by rules, ie source address?

Is there any documentation for getting this setup? Torguard's site does not appear to support config files in apc or epc format.

Is there a bypass feature that allows sophos clients to have unrestricted internet access?

Any way to pull Arista configs into Sophos, like the rule sets for example?

Thanks in advance!



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    bypass is done with firewall rules. Do you require a VPN terminating on the XG or on an internal device? If an internal device again you setup firewall rules. If an external network, not really unless it is a standard business VPN/tunnel which torguard is not.

    Importing rules from a different product, not really, you could investigate exporting in XML format, but than you would have edit the file into XG format.

    The following is a link to the KBA on setting up XG in a home environment.

    https://community.sophos.com/sophos-xg-firewall/f/recommended-reads/137737/sophos-firewall-home

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0

    Hi,

    bypass is done with firewall rules. Do you require a VPN terminating on the XG or on an internal device? If an internal device again you setup firewall rules. If an external network, not really unless it is a standard business VPN/tunnel which torguard is not.

    Importing rules from a different product, not really, you could investigate exporting in XML format, but than you would have edit the file into XG format.

    The following is a link to the KBA on setting up XG in a home environment.

    https://community.sophos.com/sophos-xg-firewall/f/recommended-reads/137737/sophos-firewall-home

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML