This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How get the VLAN to use the correct internet line that I want?

Hello everyone,

Today I am trying to deploy a network system running load balancing

But I am currently stuck with a problem.

That is, I cannot get the VLAN to use the correct internet line that I want.

My idea: i want VLAN 50 and VLAN 70 to use the line from Port 2 (WAN 2), and VLAN 30 and Port 3 to use the line from Port 1 (WAN 1). I have tried configuring it like the picture below but all can't connect to internet. Is there any way to solve this problem?

This thread was automatically locked due to age.

0 Raphael Alganes 8 months ago

Hello,

Thanks for reaching out to Sophos Community.

You may try to follow this community RR for your setup: Sophos Firewall: How to Choose The Gateway For A Firewall Rule v19

Regards,

Raphael Alganes
Community Support Engineer | Sophos Technical Support
Sophos Support Videos | Product Documentation | @SophosSupport | Sign up for SMS Alerts
If a post solves your question use the 'Verify Answer' link.
Cancel
Vote Up 0 Vote Down

Cancel
0 apijnappels 8 months ago

You need to remove those static routes; you are basically telling the firewall to reach the internal IP-addresses via the respective WAN ports.

Also I see in the WAN link manager that one of your connections has a bad status. Firewall may likely not send packets to this connection as long as it thinks the status is not OK.

You should have a look at SD-WAN routes from the link provided by Raphael Alganes

Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.
Cancel
Vote Up 0 Vote Down

Cancel