Setting Up netboot.xyz

Hi Roger,
which problem do you have?
Do you have some more details?

The client is getting stuck here.. 

The config should be really straightforward

I havent found the way to tell the firewall where the tftp server is...  

Hey Roger Mijares ,

Can you share the output from the console option (On the CLI, select option 4.)
console> system dhcp dhcp-options binding show dhcpname GuestAccess_DHCP

With client (IP 192.168.1.200) and PXE-/NetBootServer (192.168.1.11) within the same Subnet, the Firewall is not involved in traffic.

Only DHCP-Packets may come from Firewall. Do you try another DHCP-Server (TFTPD32 for example)?

NetworkBoot is often tricky. I usually have to try out the different options.

Sure your Boot-server is running correctly? A few logs?

PS: you should use the full path for the boot-file ... but depends on boot-server ... and should be visible within boot-servers-logfile

With client (IP 192.168.1.200) and PXE-/NetBootServer (192.168.1.11) within the same Subnet, the Firewall is not involved in traffic.

Only DHCP-Packets may come from Firewall. Do you try another DHCP-Server (TFTPD32 for example)?

NetworkBoot is often tricky. I usually have to try out the different options.

Sure your Boot-server is running correctly? A few logs?

PS: you should use the full path for the boot-file ... but depends on boot-server ... and should be visible within boot-servers-logfile

Ive tested the TFTP server from a pfsense and it worked just fine