Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SD-RED60 - no connection over Failover-Firewall-IP

Hi all,
configuration:
SD-RED 60 with 2 uplinks:
first - MPLS fixed IP
second - DSL - DHCP

within RED-Settings i have configured 2 connections to same FW
Firewall-IP/Hostname - 192.168.40.1 (MPLS-IP of Firewall)
2. Firewall-IP/Hostname - 22.33.44.55 (Firewall-WAN-IP)

Currently MPLS is not connected (prepare phase)

Problem:
i can see connection attempts to 192.168.40.1:3400 and 22.33.44.55:3400
but no established connection until i put 22.33.44.55 into both destination Firewall-IP-fields ...

also ... within production ... with MPLS conencted, the DSL-backup-conection isn't established when MPLS is pulled

ideas, hints??

THX



This thread was automatically locked due to age.
Parents Reply
  • Hello Vivek,

    Internet cannot be reached within MPLS. (And it's not connected at all...)

    The internet connection is via DSL = RED - WAN2 - port.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children