Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 9 replies
  • Answers 1 answer
  • Subscribers 44 subscribers
  • Views 3034 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Enable IPv6 on SSL VPN

Sandra Koehler

Hello,

I have a user that has T Mobile as their home internet. Through research and asking peers in the field it seems that T Mobile's setup is IPv6 compatible only. When the user tries to connect via VPN, they get intermittent and slow connectivity to some things and no connectivity to other things. When using another internet connection, the VPN works fine.

How do I enable IPv6 over the SSL VPN? Is it as simple as allowing IPv6 addresses to be handed out? Or do I need to do some kind of translation? We don't have IPv6 properly configured on our network and it will likely be some time before we can get into that, and the employee needs to work from home.

Any thoughts/suggestions appreciated. TIA



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to wilspin

    Hi,

    please check whether the ISP/RSP  is using native IPv6 to the internet or using a IPv6 to IP4 gateway. Why I asked is my mobile carrier uses IPv6 internally but has an IPv6 to IP4 gateway.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
Unfiltered HTML