SOPHOS XG DHCP BOOT FILE PXE/SCCM

Hello Claude Berenger Korandji ,

Thank you for reaching out to the community, Please use the following commands to add the dhcp option name TFTP_server_name: 

console> system dhcp dhcp-options binding add dhcpname GuestAccess_DHCP optionname TFTP_Server_Name(66) value http://1XX.1XX.XX.XX:X0X0

console> system dhcp dhcp-options binding show dhcpname GuestAccess_DHCP
Options Configured from GUI
---------------------------
Domain_Name
Subnetmask                                                  255.255.255.0
Default_Gateway                                             X.XX5.0.X
Domain_Name_Servers                                         X.XX5.0.X
Options Configured from CLI
---------------------------
TFTP_Server_Name(66)                                        "http://1XX.1XX.XX.XX:X0X0"

REF _ DHCP Options (RFC 2132)
#dhcp

Hello Vivek Jagad  ; i had same result 

Would request you to log a service request for further investigation, please revert us the service request here, so that we can expedite that SR...

We are facing the same issue with XG 19.5.2 MR-2, perhaps my answer on another thread helps as a temp workaround:  RE: PXE Boot DHCP Option 66 + 67 - Client falsely using the Firewall IP-Address as TFTP Server 

Cheers!

Suspecting  - NC-117690 [DHCP "Next Server" and "Boot File" ignored PXE Boot DHCP Option 66 & 67] Planned to be fixed in v20.0.1 MR-1

Very nice, thank you very much!

Addressed:  Sophos Firewall: v20.0 MR1: Feedback and experiences