image

Hi,

please replace the ssd because the one that come with unit has hidden portions for the hardware. Which iso did you use, hw or sw?
ian

Hi,

please replace the ssd because the one that come with unit has hidden portions for the hardware. Which iso did you use, hw or sw?
ian

hey Cat, thanks for your replay.

I used this HW-19.0.1_MR-1-365

Try with a different disk and how much memory does the sg210 have?
ian

So basically you need to decide where to go. 

If you want to use the Hardware Appliance (HW image) this appliance will be SG with SFOS. You can migrate the UTM License but you cannot do SFOS XG Home. So to speak you will not have a license beside the base license, which includes firewalling, NAT, VPN and SD-WAN. 

If you want to install SFOS for Home (full license), you need to install SFOS software. So you need the software installer: SW. 
This will install the software of SFOS as a bare metal installation - Means you can install the XG home as well as SFOS home comes with an own serial number. 

Thank you everyone,

I managed to deploy it as a vm, and bridged it to gns3.

The only bad thing is im loosing link speed.

Kind regards,

Dragos

Hi,

try changing your VM driver type.

Ian

Hey cat,

I took the ssd from an old laptop and it worked.

I can confirm that that indeed replacing the disk worked.

Many thanks

Dragos