Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 7 replies
  • Subscribers 40 subscribers
  • Views 3736 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

image

Dragos Avram1

Hello everyone,

I am just getting started with sophos firewalls and i could use some advice.

I got an old sg210 from work hoping to play around with it and design my own lab at home.

i would like to install an xg image on it. tried with an usb the bare metal vrsion and failed.

i took the ssd out and formated, and used iso to usb to install the image. is not doing anything.

Can someone explain me how to install that. plase explain me like im stupid. still got the ssd out.

Kind regards



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    please replace the ssd because the one that come with unit has hidden portions for the hardware. Which iso did you use, hw or sw?
    ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • +1 in reply to rfcat_vk

    hey Cat, thanks for your replay.

    I used this HW-19.0.1_MR-1-365

  • +1 in reply to Dragos Avram1

    Try with a different disk and how much memory does the sg210 have?
    ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • +1 in reply to Dragos Avram1

    So basically you need to decide where to go. 

    If you want to use the Hardware Appliance (HW image) this appliance will be SG with SFOS. You can migrate the UTM License but you cannot do SFOS XG Home. So to speak you will not have a license beside the base license, which includes firewalling, NAT, VPN and SD-WAN. 

    If you want to install SFOS for Home (full license), you need to install SFOS software. So you need the software installer: SW. 
    This will install the software of SFOS as a bare metal installation - Means you can install the XG home as well as SFOS home comes with an own serial number. 

    __________________________________________________________________________________________________________________

Reply
  • +1 in reply to Dragos Avram1

    So basically you need to decide where to go. 

    If you want to use the Hardware Appliance (HW image) this appliance will be SG with SFOS. You can migrate the UTM License but you cannot do SFOS XG Home. So to speak you will not have a license beside the base license, which includes firewalling, NAT, VPN and SD-WAN. 

    If you want to install SFOS for Home (full license), you need to install SFOS software. So you need the software installer: SW. 
    This will install the software of SFOS as a bare metal installation - Means you can install the XG home as well as SFOS home comes with an own serial number. 

    __________________________________________________________________________________________________________________

Children
Unfiltered HTML