Parents
  • I have a problem with firewall rules. Since I upgraded from 19.0 GA to 19.0 MR1, my WIFI rule is not working anymore, nothing is let through. No ping, no TCP connection from LAN zone to WIFI zone:

    As you can see, 0 bytes sent/received. When I switch back to 19.0 GA it all works again and counters go up. I have no explanation why this is happening, any idea where to look for in the logs?

    Edit: Same seems to be the case for Rule #11 SMTP.

  • Same problem observed. After the upgrade to v19.0.1 MR-1 traffic is not hitting the firewall rule and is being logged and dropped by rule ID=0.

  • Could you send me the AccessID as well? 

    __________________________________________________________________________________________________________________

  • Coming back to this one: &  

    This seems to be an already under investigation issue with the wlnet (separate Zone) based traffic. 

    Bug ID: NC-94019

    Currently under investigation. 

    __________________________________________________________________________________________________________________

  • One workaround in a broader Scale would be using Central Wireless + VLAN Tagging, if applicable. 

    Just wanted to share this workaround / alternative deployment method. (That is the reason, i did not pick up this issue, as i do not use any separate zone anymore and moved everything to VLAN). 

    Central Wireless is free to use.

    __________________________________________________________________________________________________________________

  • We are also facing issue of with wireless separate guest  network . I have deleted  guest  zone and recreated it ,then added to acces point group again then only it works......

  • Temporary workaround provided by Support Engineer which I believe I can share here.

    You need to modify the timer value in /sys/class/net/<affected_interface_name>/bridge/ageing_time from 0 to 30000. In my case:

    # echo 30000 > /sys/class/net/wlnet3/bridge/ageing_time

    After above modification traffic started to hit the firewall rule as before the upgrade to v19.0.1 MR-1.

  • I can confirm LuCarToni's workaround. I had the same problem after upgrading from 18.5.2 to 19.0.1.
    I put the access points (without Central Wireless) into several VLANs and so far I have no more problems. It is of course a little effort to provide the active components (switches) with the VLANs, but are with us and our customers all managed switches Relaxed
    And I have also gained more flexibility, because I can now determine exactly in which directions the data traffic between the WLANs and the LANs should run.

    Best regards

    Michael

Reply
  • I can confirm LuCarToni's workaround. I had the same problem after upgrading from 18.5.2 to 19.0.1.
    I put the access points (without Central Wireless) into several VLANs and so far I have no more problems. It is of course a little effort to provide the active components (switches) with the VLANs, but are with us and our customers all managed switches Relaxed
    And I have also gained more flexibility, because I can now determine exactly in which directions the data traffic between the WLANs and the LANs should run.

    Best regards

    Michael

Children
No Data