Connect Two Sophos Firewall via lan connection

Hi AHMED SHATA,

Please configured IPSec VPN site to site to meet your requirement :

https://support.sophos.com/support/s/article/KB-000035717?language=en_US#:~:text=the%20remote%20LAN.-,Create%20an%20IPsec%20VPN%20connection,Authentication%20Type%20to%20preshared%20key.

Thanks and Regards

Hello there,

Thank you for contacting the Sophos Communnity.

It would depend on the technology you want to use or have available (MPLS, IPsec) but in most cases, a site-to-site VPN tunnel would work as Bharat suggested.

Regards,

Bharat J thanks for your response, but I don't need this scenario.

I have a local connection between firewalls (Lan Cable) via WIMAX, so I want to know how to connect two firewalls via LAN connection NOT VPN (WAN)

Thanks in Advance 

Hi AHMED SHATA , 

It would be great if you share the network diagram with all possible IP Schema to assist you further.

Thanks and Regards

* I Want LAN Networks in Both Sites can access each other.

** there's a direct Lan Cable connected between Sophos Firewalls.

***Every site have separated internet connection without Static IP 

**** So I want to connect both site via Lan connection

Bharat J

Hi AHMED SHATA

We have checked and found route precedence was set to VPN sdwan_policyroute static which we change as per the below command : 

 console> system route_precedence set static sdwan_policyroute vpn

You will check the same from your end rest of the traffic from other end and update us in case of any issue 

Thanks and Regards

Hi Thank you Bharat

Issue solved by adding the same IP range in Lan Connection 

FW1 --  192.100.100.2

FW2 --  192.100.100.3 

In Static Route I added default gateway

FW1 --  192.100.100.3

FW2 -- 192.100.100.2

added Lan IP in FW1 as a gateway in Static route in FW2

add Lan IP in FW2 as a gateway in Static route in FW1