Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 7 replies
  • Subscribers 38 subscribers
  • Views 3278 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Connect Two Sophos Firewall via lan connection

AHMED SHATA

Dear i need your support in the below issue 

I have two Sophos firewalls in two sites and I want to connect both of them via a LAN connection (WIMAX)

every firewall has a different LAN ID, I want both LAN networks to access each other

Whats' the perfect way to proceed with this plan?

Firewall 1

Lan: 10.150.0.0\22

Firewall 2

Lan: 192.168.1.0\24

Thanks in advance 



This thread was automatically locked due to age.
Parents
  • 0

    thanks for your response, but I don't need this scenario.

    I have a local connection between firewalls (Lan Cable) via WIMAX, so I want to know how to connect two firewalls via LAN connection NOT VPN (WAN)

    Thanks in Advance 

  • 0 in reply to AHMED SHATA

    Hi AHMED SHATA , 

    It would be great if you share the network diagram with all possible IP Schema to assist you further.

    Thanks and Regards

    "Sophos Partner: Networkkings Pvt Ltd".

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to Bharat J

    * I Want LAN Networks in Both Sites can access each other.

    ** there's a direct Lan Cable connected between Sophos Firewalls.

    ***Every site have separated internet connection without Static IP 

    **** So I want to connect both site via Lan connection

  • 0 in reply to AHMED SHATA

    Hi AHMED SHATA

    We have checked and found route precedence was set to VPN sdwan_policyroute static which we change as per the below command : 

     console> system route_precedence set static sdwan_policyroute vpn

    You will check the same from your end rest of the traffic from other end and update us in case of any issue 

    Thanks and Regards

    "Sophos Partner: Networkkings Pvt Ltd".

    If a post solves your question please use the 'Verify Answer' button.

  • +1 in reply to Bharat J

    Hi Thank you Bharat

    Issue solved by adding the same IP range in Lan Connection 

    FW1 --  192.100.100.2

    FW2 --  192.100.100.3 

    In Static Route I added default gateway

    FW1 --  192.100.100.3

    FW2 -- 192.100.100.2

    added Lan IP in FW1 as a gateway in Static route in FW2

    add Lan IP in FW2 as a gateway in Static route in FW1 

Reply
  • +1 in reply to Bharat J

    Hi Thank you Bharat

    Issue solved by adding the same IP range in Lan Connection 

    FW1 --  192.100.100.2

    FW2 --  192.100.100.3 

    In Static Route I added default gateway

    FW1 --  192.100.100.3

    FW2 -- 192.100.100.2

    added Lan IP in FW1 as a gateway in Static route in FW2

    add Lan IP in FW2 as a gateway in Static route in FW1 

Children
No Data
Unfiltered HTML