Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 10 replies
  • Answers 1 answer
  • Subscribers 39 subscribers
  • Views 1256 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos rule and policies Issue

George Wong1

I wanna make a specific date schedule to block internet during holiday, but found issue as following 

1) after inputting Start Date and End Date , the timing section do not have suitable criteria for me to select 

   Date range from 1/Sep to 1/Sep will block internet , and the timing section just only have the Mon, Tue...weekdays .......without any parameter for my specific date range to select 

2) Timing Issue 

    - Start Date , End Date have the time parameters to select but Timing section also has the time parameters to input , so which one can be refer, or which one is the right choice 

Please advise, thanks......

-->Firewall version XG 18.05

George



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    I am trying to understand what the issue is?

    You would apply this to a firewall rule or series of firewall rules where you have identified the users you want to block.

    Ian

    XG115W - v20.0.3 MR-3 - on holiday

    XGS118 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Yes, in this screen when I selected a specific date range to run the policy it seems that timing field has no appropriate parameter for me to select (Mon, Tue.....) for the policy to run during the above start/End date. 

    Beside, Start/End date has its own timing range but the following timing field also has its own range. I got no idea on both field and which one should be used.

    Since the second timing is a compulsory fields as well

    So towards this screen , how to define a schedule date range like 1/9/21 by 00:00 to 23:59 to run the policy ? 

    Thanks....

    George

Reply
  • 0 in reply to rfcat_vk

    Yes, in this screen when I selected a specific date range to run the policy it seems that timing field has no appropriate parameter for me to select (Mon, Tue.....) for the policy to run during the above start/End date. 

    Beside, Start/End date has its own timing range but the following timing field also has its own range. I got no idea on both field and which one should be used.

    Since the second timing is a compulsory fields as well

    So towards this screen , how to define a schedule date range like 1/9/21 by 00:00 to 23:59 to run the policy ? 

    Thanks....

    George

Children
Unfiltered HTML