Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 101 replies
  • Subscribers 52 subscribers
  • Views 26848 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos Firewall: v18.5 MR1: Feedback and experiences

LuCar Toni

V18.5 MR2: https://community.sophos.com/sophos-xg-firewall/b/blog/posts/sophos-firewall-v18-5-mr2-is-now-available

https://community.sophos.com/sophos-xg-firewall/f/discussions/131468/sophos-firewall-v18-5-mr2-feedback-and-experiences

Release V18.5 MR1 Post (326): https://community.sophos.com/sophos-xg-firewall/b/blog/posts/sophos-firewall-v18-5-mr1-is-now-available 

https://docs.sophos.com/releasenotes/index.html?productGroupID=nsg&productID=xg&versionID=18.5

EAP(318) Blog Post: https://community.sophos.com/sophos-xg-firewall/b/blog/posts/sophos-firewall-v185-mr1-eap

"Old" MR3 Thread: https://community.sophos.com/xg-firewall/f/discussions/123403/xg-firewall-v18-mr-3-feedback-and-experiences

"Old" MR4 Thread: https://community.sophos.com/sophos-xg-firewall/f/discussions/124771/xg-firewall-v18-mr-4-feedback-and-experiences

"Old" MR5 Thread: https://community.sophos.com/sophos-xg-firewall/f/discussions/127053/xg-firewall-v18-mr-5-feedback-and-experiences



MR2
[bearbeitet von: LuCar Toni um 7:43 AM (GMT -8) am 30 Nov 2021]
Parents
  • 0

    Hi folks,

    update on reports

    The reports are back to two a day, very good down from 40 or more. The date on the reports is back to using GMT, for awhile when the DEVs were investigating I did actually have local time displayed on my reports, so basically the reports are half fixed as far as dates go.

    Missing from the reports is yesterday sig update download and NTP traffic. Updates to follow over the next couple off days as reports etc settle down.

    Ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0

    Hi folks,

    update on reports

    The reports are back to two a day, very good down from 40 or more. The date on the reports is back to using GMT, for awhile when the DEVs were investigating I did actually have local time displayed on my reports, so basically the reports are half fixed as far as dates go.

    Missing from the reports is yesterday sig update download and NTP traffic. Updates to follow over the next couple off days as reports etc settle down.

    Ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
  • 0 in reply to rfcat_vk

    Further update on reports.

    NTP/UDP 123 no longer appears in my daily reports. The previous version daily reports usually show over a 1000 hits for this port. Logviewer shows the traffic.

    Some thoughts on why NTP/UDP123 no longer appears in the daily reports. Sometime ago (within the last year) I started a thread about the hairpin NAT not working correctly. I suspect the issues has been resolved and as a result only the traffic that goes through the firewall LAN to WAN is actually counted, so the traffic from the internal NTP server is actually quite low (hit count) so is possibly below the reporting level.

    The NTP server is still working correctly.

    Ian

    I changed the NTP settings to destination ANY which now works. The NTP/UDP123 appears in the daily reports again. One IoT device needed a restart to get it to behave with the NTP server.

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.



    updated NTP/UDP123 reports issue.
    [edited by: rfcat_vk at 12:49 AM (GMT -7) on 18 Jul 2021]
Unfiltered HTML