Just got our Sophos 450XG up and running but can't get the port forwarding to work for our Signiant Media Shuttle server.
I've come from a USG so this is making my brain hurt.
I'm using port 6 for this network which is 192.168.100.1/24
WAN port is set to port 2.
Default Firewall rules in place.
Server has a static LAN IP of 192.168.100.5
It has internet access.
I have setup the rules as follows:
Originally I had the source port set to the specific ports but mentioned but have now resorted to the default range.
The following rules are needed according to Signiant:
ProtocolDirectionPort RangeChange TypeDescription
| TCP | Inbound | 80 | Network Firewall | Used for file transfer failover. Content is encrypted before being transferred. |
| TCP | Inbound | 49221 | Network Firewall | Used for file transfer |
| UDP | Bidirectional | 49221-49421 | Network Firewall | Used for file transfer |
| UDP | Bidirectional | 49321 | Network Firewall | Used for file transfer |
| TCP | Bidirectional | 50221 | Network Firewall | Used for file transfer |
| TCP | Outbound | 443 | Network Firewall | Used to connect to cloud services |
I'm presuming I don't need to add a specific rule for outbound since the default rule takes care of that.
- Do I need to specify the Wan to use and do I need to specify NAT MASQ or should it work without the advanced options? I tried specifying the WAN port and turning on MASQ but it seemed to make no difference.
- Have I set the UDP range correctly with the colon? 49221:49421
Can't figure it out.
This thread was automatically locked due to age.
