How to check WAN Interface from Console

For point 1 and 2: ethtool Port2

For point 3: ifconfig Port2

COnsole shows only following commands -

console>
clear clear screen
tcpdump Dump traffic on a network
telnet User interface to the TELNET protocol.
show Show various system modules information
set Set Entities
system System Configuration
enableremote Enable Remote Access
disableremote disableremote
ping Send ICMP ECHO_REQUEST packets to network hosts
traceroute Print the route packets take to network host
drop-packet-capture Dump Dropped Traffic On a Network
dnslookup Query internet domain name servers for hostname resolving
ping6 Send ICMPv6 ECHO_REQUEST packets to network hosts
telnet6 User interface to the TELNET protocol.
traceroute6 Print the route packets take to network host
dnslookup6 Query internet domain name servers for hostname resolving

You need to use advanced console, option 5 and then option 3.

It works. Thanks a lot.

It works. Thanks a lot.