Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 38 subscribers
  • Views 4653 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to check WAN Interface from Console

Sachin Bhatgare

Hi,

One of the ISP asked me to share the following to resolve upload speed issue - 

1. Speed and duplex setting of WAN interface

2. Flow control setting of WAN interface

3. CRC/Input error status of WAN interface

How can I check these settings using the console.



This thread was automatically locked due to age.
Parents
  • +1

    For point 1 and 2: ethtool Port2

    For point 3: ifconfig Port2

  • 0 in reply to lferrara

    COnsole shows only following commands -

    console>
    clear clear screen
    tcpdump Dump traffic on a network
    telnet User interface to the TELNET protocol.
    show Show various system modules information
    set Set Entities
    system System Configuration
    enableremote Enable Remote Access
    disableremote disableremote
    ping Send ICMP ECHO_REQUEST packets to network hosts
    traceroute Print the route packets take to network host
    drop-packet-capture Dump Dropped Traffic On a Network
    dnslookup Query internet domain name servers for hostname resolving
    ping6 Send ICMPv6 ECHO_REQUEST packets to network hosts
    telnet6 User interface to the TELNET protocol.
    traceroute6 Print the route packets take to network host
    dnslookup6 Query internet domain name servers for hostname resolving

Reply
  • 0 in reply to lferrara

    COnsole shows only following commands -

    console>
    clear clear screen
    tcpdump Dump traffic on a network
    telnet User interface to the TELNET protocol.
    show Show various system modules information
    set Set Entities
    system System Configuration
    enableremote Enable Remote Access
    disableremote disableremote
    ping Send ICMP ECHO_REQUEST packets to network hosts
    traceroute Print the route packets take to network host
    drop-packet-capture Dump Dropped Traffic On a Network
    dnslookup Query internet domain name servers for hostname resolving
    ping6 Send ICMPv6 ECHO_REQUEST packets to network hosts
    telnet6 User interface to the TELNET protocol.
    traceroute6 Print the route packets take to network host
    dnslookup6 Query internet domain name servers for hostname resolving

Children
Unfiltered HTML