Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 39 subscribers
  • Views 4255 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to check WAN Interface from Console

Sachin Bhatgare

Hi,

One of the ISP asked me to share the following to resolve upload speed issue - 

1. Speed and duplex setting of WAN interface

2. Flow control setting of WAN interface

3. CRC/Input error status of WAN interface

How can I check these settings using the console.



This thread was automatically locked due to age.
Parents
  • +1

    For point 1 and 2: ethtool Port2

    For point 3: ifconfig Port2

  • 0 in reply to lferrara

    COnsole shows only following commands -

    console>
    clear clear screen
    tcpdump Dump traffic on a network
    telnet User interface to the TELNET protocol.
    show Show various system modules information
    set Set Entities
    system System Configuration
    enableremote Enable Remote Access
    disableremote disableremote
    ping Send ICMP ECHO_REQUEST packets to network hosts
    traceroute Print the route packets take to network host
    drop-packet-capture Dump Dropped Traffic On a Network
    dnslookup Query internet domain name servers for hostname resolving
    ping6 Send ICMPv6 ECHO_REQUEST packets to network hosts
    telnet6 User interface to the TELNET protocol.
    traceroute6 Print the route packets take to network host
    dnslookup6 Query internet domain name servers for hostname resolving

  • +1 in reply to Sachin Bhatgare

    You need to use advanced console, option 5 and then option 3.

Reply Children
Unfiltered HTML