Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN: Access to SSL Client side

There is a SSL VPN client connection to a Sophos XG Firewall. The Connection is fine. From the client side i get access to the XG Firewall local LAN. Now i need also access from XG Firewall local LAN to the Client LAN.

I have two Firewall Rules.

- VPN to LAN
- LAN to VPN

What else do I need.

Thank's  community.



This thread was automatically locked due to age.
Parents Reply Children
  • Marcel,

    Can you explain a bit better? Do you need to access a lan that is behind a S2S vpn?

  • Ok. Let's try to explain.

    ---------------------------------------------        VPN SSL Connection    -----------------------------------------------

    | SSL VPN Client, LAN 192.168.75.0/24 |  <-------------------------> | XG Firewall, local LAN 192.168.11.0/24 |

    ---------------------------------------------                                         -----------------------------------------------

    Access from Client LAN to XG Firewall local LAN is ok.

    MANAGEMENT: >STATE:1580996743,CONNECTED,SUCCESS,10.81.234.6,46.14.83.102,8443,192.168.75.223,58254

    Ping wird ausgeführt für 192.168.11.101 mit 32 Bytes Daten:
    Antwort von 192.168.11.101: Bytes=32 Zeit=21ms TTL=127
    Antwort von 192.168.11.101: Bytes=32 Zeit=21ms TTL=127
    Antwort von 192.168.11.101: Bytes=32 Zeit=21ms TTL=127
    Antwort von 192.168.11.101: Bytes=32 Zeit=21ms TTL=127

    Ping-Statistik für 192.168.11.101:
    Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0
    (0% Verlust),
    Ca. Zeitangaben in Millisek.:
    Minimum = 21ms, Maximum = 21ms, Mittelwert = 21ms

     

    But i don't have access from XG Firewall local LAN to VPN Client LAN.

     

    Ping wird ausgeführt für 10.81.234.6 mit 32 Bytes Daten:
    Zeitüberschreitung der Anforderung.

    Ping-Statistik für 10.81.234.6:
    Pakete: Gesendet = 1, Empfangen = 0, Verloren = 1
    (100% Verlust)

    or 

    Ping wird ausgeführt für 192.168.75.5 mit 32 Bytes Daten:
    Zeitüberschreitung der Anforderung.
    Zeitüberschreitung der Anforderung.
    Zeitüberschreitung der Anforderung.

    Ping-Statistik für 192.168.75.5:
    Pakete: Gesendet = 3, Empfangen = 0, Verloren = 3
    (100% Verlust)

  • Thanks for the info.

    Where are you executing the ping command?

  • Hi  

    Please login to SSH access of the device and select option 4. Device console and execute the command

    tcpdump 'host <IPaddress of the SSL VPN client> 

    Initiate the traffic and share the output

    Regards,

    Keyur
    Community Support Engineer | Sophos Support
    Sophos Support VideosKnowledge Base  |  @SophosSupport | Sign up for SMS Alerts |
    If a post solves your question use the 'This helped me' link

  • Both sides. I liked to show you that the ping is working from client side to XG LAN side, but not from XG LAN side to client side.

  • Here is the tcpdump result:

    console> console> tcpdump 'host 192.168.75.223'
    % Error: Unknown Parameter 'console>'
    console> tcpdump: Starting Packet Dump
    % Error: Unknown Parameter 'tcpdump:'
    request, id 1, seq 211, length 40.38 > 192.168.75.223: ICMP echo
    % Error: Unknown Parameter '08:37:23.222963'
    equest, i d 1, seq 211, length 40.38 > 192.168.75.223: ICMP echo r
    % Error: Unknown Parameter '08:37:23.223015'
    request, id 1, seq 211, length 40102 > 192.168.75.223: ICMP echo
    % Error: Unknown Parameter '08:37:23.223304'
    request, id 1, seq 212, length 40.38 > 192.168.75.223: ICMP echo
    % Error: Unknown Parameter '08:37:28.079108'
    equest, i d 1, seq 212, length 40.38 > 192.168.75.223: ICMP echo r
    % Error: Unknown Parameter '08:37:28.079120'
    request, id 1, seq 212, length 40102 > 192.168.75.223: ICMP echo
    % Error: Unknown Parameter '08:37:28.079410'
    request, id 1, seq 213, length 40.38 > 192.168.75.223: ICMP echo
    % Error: Unknown Parameter '08:37:33.079425'
    equest, i d 1, seq 213, length 40.38 > 192.168.75.223: ICMP echo r
    % Error: Unknown Parameter '08:37:33.079441'
    request, id 1, seq 213, length 40102 > 192.168.75.223: ICMP echo
    % Error: Unknown Parameter '08:37:33.079738'
    request, id 1, seq 214, length 40.38 > 192.168.75.223: ICMP echo
    % Error: Unknown Parameter '08:37:38.079755'
    equest, i d 1, seq 214, length 40.38 > 192.168.75.223: ICMP echo r
    % Error: Unknown Parameter '08:37:38.079765'
    request, id 1, seq 214, length 40102 > 192.168.75.223: ICMP echo
    % Error: Unknown Parameter '08:37:38.080040'

  • Hi  

    When you log in to console, you will get the prompt as console>, you do not have to type it, 

    Please refer to the article-  https://community.sophos.com/kb/en-us/123567

    Regards,

    Keyur
    Community Support Engineer | Sophos Support
    Sophos Support VideosKnowledge Base  |  @SophosSupport | Sign up for SMS Alerts |
    If a post solves your question use the 'This helped me' link

  • Sorry for that.

    console> tcpdump 'host 192.168.75.223'
    tcpdump: Starting Packet Dump
    08:53:25.266391 Port1, IN: IP 192.168.11.38 > 192.168.75.223: ICMP echo request, id 1, seq 215, length 40
    08:53:25.266441 br0, IN: IP 192.168.11.38 > 192.168.75.223: ICMP echo request, id 1, seq 215, length 40
    08:53:25.266559 Port2, OUT: IP 46.14.83.102 > 192.168.75.223: ICMP echo request, id 1, seq 215, length 40
    08:53:30.134462 Port1, IN: IP 192.168.11.38 > 192.168.75.223: ICMP echo request, id 1, seq 216, length 40

  • Hi  

    Please share the output of the below command

    console> system route precedence show

    Regards,

    Keyur
    Community Support Engineer | Sophos Support
    Sophos Support VideosKnowledge Base  |  @SophosSupport | Sign up for SMS Alerts |
    If a post solves your question use the 'This helped me' link

  • Default routing Precedence:
    1. Policy routes
    2. VPN routes
    3. Static routes