Good morning everyone,
I am currently in troubble with my Sophos XG310 configuration.
The following issue exists:
Sophos XG310 Firmware 17.5.9
WAN 1 on Port 5 (Fibre direct primary WAN)
WAN 2 on Port 6 (Fibre solo secondary WAN)
All our WAN Traffic is going out via the WAN 1 Gateway (port 5).
At least we have 3 VLANs, which should use the WAN 2 Gateway (port 6) as default.
Guest VLAN, Customers VLAN und Lab VLAN
People or Devices in the VLAN "Customer" are calling the Domain "https://webmail.domain.tld".
This Domain resolves to an IPv4 address on the WAN1 Interface.
The XG310 redirects the Traffic from WAN 2 (port 6) to the internal IP of the NAT from the WAN 1.
The way should be:
Client (10.10.28.29/22) -> Accessing https://webmail.domain.tld -> External WAN IP of WAN 1 (87.44.XX.XXX) -> Sophos NAT to internal IP
Actually I configured it on this Way:
Firewall Rule which access the devices from the Guest-, Customer- and Lab VLAN to the internal IP Adress of the service.
How I can configure this ?
This thread was automatically locked due to age.
