Hi All. Long time Astaro > Sophos UTM9 home user, finally making the switch to Sophos XG Home, due to 50 IP limit. I have a PC with an on-board NIC, plus two additional 1000MB PCI NICs installed. Port1 is LAN, Port2 is WAN #1 and Port3 is WAN #2. No matter what I do, one of the NICs (Port2) is in a "Disconnected" state. As soon as I plug the Cable modem into Port2, the lights all come on and everything looks great, but in the XG GUI it says the port is "Disconnected". If I put that same Cable modem onto Port3, it immediately gets an IP from the ISP and all is well. Other things I've tried:
- Set the Zone to None, then back to WAN again, but no change.
- Set the Zone to DMZ and set a Static IP in a unique private range, then the interface changes to "Disabled" (that's something!)
- From CLI, issued the command 'ifconfig Port2 up' but it always responds "Cannot assign requested address"
Ultimately, I want dual WAN / WAN failover capability, so it's important for me to get this Port2 working. Any ideas?
Thank you!
-Scott
This thread was automatically locked due to age.