Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 7 replies
  • Answers 1 answer
  • Subscribers 39 subscribers
  • Views 4293 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Port shows Disconnected

sneader

Hi All. Long time Astaro > Sophos UTM9 home user, finally making the switch to Sophos XG Home, due to 50 IP limit.  I have a PC with an on-board NIC, plus two additional 1000MB PCI NICs installed. Port1 is LAN, Port2 is WAN #1 and Port3 is WAN #2.  No matter what I do, one of the NICs (Port2) is in a "Disconnected" state. As soon as I plug the Cable modem into Port2, the lights all come on and everything looks great, but in the XG GUI it says the port is "Disconnected".  If I put that same Cable modem onto Port3, it immediately gets an IP from the ISP and all is well.  Other things I've tried:

  • Set the Zone to None, then back to WAN again, but no change. 
  • Set the Zone to DMZ and set a Static IP in a unique private range, then the interface changes to "Disabled" (that's something!)
  • From CLI, issued the command 'ifconfig Port2 up' but it always responds "Cannot assign requested address" 

Ultimately, I want dual WAN / WAN failover capability, so it's important for me to get this Port2 working.  Any ideas?

Thank you!

-Scott



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    sounds like the ISP has locked the address to one of the MACs. If you have dual WAN links why are you trying the modem on different interfaces?

    Ian

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Hi Ian.  Thanks for your willingness to assist.  My original plan was:

    Port1: LAN
    Port2: WAN with Cable Modem, via DHCP
    Port3: WAN with DSL Modem, via PPPoE

    Port1 LAN is OK, and Port3 came up fine with a Public IP via PPPoE.  Port2 is "Disconnected" even though there is connectivity showing on the NIC and the Cable Modem.

    Simply as a test, I switched the configuration around and moved the modems around like this:

    Port1: LAN
    Port2: WAN with DSL Modem, via PPPoE
    Port3: WAN with Cable Modem, via DHCP

    Right away, Port3 received an IP from the Cable Modem provider via DHCP, and Port2 is still "Disconnected".

    Again, to just test things out, I switch them AGAIN, reconfiguring Port2 and Port3 as I originally had them:

    Port1: LAN
    Port2: WAN with Cable Modem, via DHCP
    Port3: WAN with DSL Modem, via PPPoE

    As you can guess, now the DSL works and has a Public IP via PPPoE, and Port2 is "Disconnected".  Port 2 is always "Disconnected". It makes no difference what you do with it.

    Does this help?  How can I make it not be "Disconnected" (or "Disabled" when assigning a Static IP to it, while testing)?

    - Scott

  • 0 in reply to sneader

    Hi Scott,

    you will need to make some changes in the network - WAN Link manager settings for the failing connection.

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Hi Ian. I am open to your ideas, but I do not think this is an issue with WAN Link Manager.   I have tried setting one port or the other to "Backup" instead of "Active", but Port2 always says "Disconnected".  In WAN Link Manager, Port2 always has a "red" button under "Status".  

    Again, I am open to your ideas of what I should be changing in WAN Link Manager in order to make Port2 start to work.

    - Scott

Reply
  • 0 in reply to rfcat_vk

    Hi Ian. I am open to your ideas, but I do not think this is an issue with WAN Link Manager.   I have tried setting one port or the other to "Backup" instead of "Active", but Port2 always says "Disconnected".  In WAN Link Manager, Port2 always has a "red" button under "Status".  

    Again, I am open to your ideas of what I should be changing in WAN Link Manager in order to make Port2 start to work.

    - Scott

Children
  • 0 in reply to sneader

    Hi Scott,

    you need to change the setting used by the port to check connectivity.

    My XG setup.

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Unfortunately, none of this is helping the situation.  The port is still suck in "Disconnected" mode, no matter what I do.  If I plug a switch into it, and call it the DMZ zone, and throw a static IP on it, it's still "Disconnected".  It never leaves this state.  I'm going to buy a new NIC and see if that magically solves the problem, because I don't know what else to do. 

    - Scott

Unfiltered HTML