APX AP after RED device

Question

We put a APX AP after a RED device , but is doesn't show up at the XG managment tool. 
 
 LED is solid green. 
 
 Can someone point me in the good direction ???

Vishal_R · Accepted Answer

Hi helmut willems Thanks for the sharing the packet details. As per the packet request, the AP is getting leased IP 10.10.0.158 and it is communicating with 1.2.3.4.2712 ( awed service - Service for wireless protection).So it should come under "Pending Access Point".If it is not coming under pending list then create a plain rule for APX IP 10.10.0.158 or what ever IP getting leased on XG to allow Internet or firmware download request. If any packets going towards WAN from APX IP then it is trying to get firmware and wait for few minutes till firmware of APX get updated. Later on you may check again "Pending Access Point" and if still not coming then try by rebooting APX once and confirm.