XG routing not working a vlan interface

Hi Amr Kabary 

Please add back route on XG for VLAN 4 network and check the PING/trace route from VLAN 1 machine to VLAN 4 machine.

Backroute you need to add on your switch IP which is connected with XG LAN Port.

This may fix this issue.

thanks for the reply

but this is a router on a stick

in this model you dont create layer 3 interface on the switch
switch port facing xg is a trunk port 

Hi Amr Kabary 

can you generate the PING and check the packet request on XG ?

You may check the traffic or packet request via below CLI command:

console > tcpdump 'host X.X.X.X.

where X.X.X.X is the destination machine IP 

Please share the result here.

Also collect below command output.

console> sy dia utilities netconf route list

Hi,

 XG uses layer 3 VLANs and I am surprised that no-one has commented about using VLAN 1 which is not supported on XG.

Ian

vlan 1 here is a physical interface   not a vlan

pinging from my machine in vlan 1 to vlan 4 1092.168.4.102 which is pingable from xg

Hi 

Can you also share the below output which I requested in previous comment.

console> sy dia utilities netconf route list

or from advance shell.

#route -n

shared it the first time but the photo was corrupted

Hi Amr

Thanks for sharing it. 

If possible please delete VLAN interface on XG and re add it ( may be some problem with firewall table) and share the status.