Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Very low speed on speedtest.com

Hello! I need help. i have very low speed site speedtest.com showed 15mb/s download and 10 mb/s upload. My Provider give me 50mb/s... About my device: Sophos Firmware Version SFOS 17.1.3 MR-3. Install on virtual machine VMware ESXI 6.0. 

For info: 1)Total Available WAN Bandwidth 100000

Bandwidth Usage
Priority 	Guarantee(KBps) 	 Limit(KBps) 
------------------------------------------------------------------
       0 	       0.00		      0.00    
       1 	       0.00		      0.00    
       2 	       0.00		      0.00    
       3 	       0.00		      0.00    
       4 	       9.75		  79872.00    
       5 	       2.00		  40000.00    
       6 	       0.00		      0.00    
       7 	       0.00		      0.00    
------------------------------------------------------------------
       7 	       1.00		 100000.00 (Default Policy)
------------------------------------------------------------------
Total    	      12.75		 219872.00   

This values constantly changing.

2) Intrusion Prevention>DoS Attacks>TCP flood is No, UDP flood is No. All paramets is No.


3) In DoS & Spoof Protection>TCP flood and UDP flood flag is not set.
Attack Type Source Destination
Packet rate per
Source
(Packet/min)
Burst rate per
Source
(Packet/sec)
Apply
Flag
Source
Traffic
Dropped
Packet rate per
Destination
(Packet/min)
Burst rate per
Destination
(Packet/sec)
Apply
Flag
Destination
Traffic
Dropped
SYN Flood       0       0
UDP Flood       0       0
TCP Flood       0       0
ICMP/ICMPv6 Flood       0       0
Dropped Source Routed Packets - - - - - -  Yes -
Disable ICMP/ICMPv6 Redirect Packet - - - - - -  Yes -
ARP Hardening - - - - - -   -

Which settings do i need to show? Sorry for my English...


This thread was automatically locked due to age.
Parents
  • Hi Dmitry,

    To troubleshoot this issue, refer to #4 in my TS Guide. Alongside, you can check the bandwidth that the XG firewall is receiving, by executing the wget command and downloading a file. Try the following command in the advance shell and show us the output.

    wget --no-check-certificate <fqdn to a download file>

    Thanks,

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

  • Hi! I saw your guide.I used command show network interfaces. And there were no errors and dropped packets. I didt try all options in your guide, later Im all do it.

    Question, for example, can you show me what i should will write here <fqdn to a download file> . Full command please!

Reply
  • Hi! I saw your guide.I used command show network interfaces. And there were no errors and dropped packets. I didt try all options in your guide, later Im all do it.

    Question, for example, can you show me what i should will write here <fqdn to a download file> . Full command please!

Children
No Data