This is more of an information post to be honest, but could not find a more suitable place to post it! I spent some time searching for the two error codes that I was seeing, but could not find any knowledge base article that dealt with them directly. Hopefully this post will be useful to anyone experiencing the same problems I had!
I recently set up Enterprise Console (5.5.0) for my Unit, and experienced great difficulty in getting the Endpoints talking to the RMS.
0000002e
At first I was getting the 0000002e error code.
This ultimately equated to 'The Enterprise Console can't talk to the Endpoint over the network'
Our Enterprise Console is on a server in a 'Servers' VLAN and the Endpoint I was attempting to reach was in our 'Equipment' VLAN
Adding a DNS entry for the 'Equipment' VLAN to the Server Network Adaptor settings helped...
80070035
I was then getting error code 80070035.
This ultimately equated to 'The Endpoint can't pull the install files from the RMS'
I added a DNS entry for the 'Servers' VLAN to the Endpoint's Network Adaptor settings...
All working fine now!
Able to 'Protect Computer' and receive reports from them.
This thread was automatically locked due to age.
