Thread Info
  • Locked Locked
  • Replies 1 reply
  • Subscribers 20 subscribers
  • Views 3226 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

YAVPNQ. (Yet another VPN Question).

Ray Banville

I have a bit of an issue and need help configuring the Sophos.

 

We are trying to setup VPN Tunnel with a few different sites.

 

We have “Home Office” with internal lan of 10.3.0.0

And Satellites

 

Remote 1 internal lan of 192.168.168.0

Remote 2 internal lan of 192.168.1.0

Remote 3 internal lan of 10.10.10.0

And Remote 4 internal lan of 192.168.1.0

 

As you can see remote 2 and 4 have same subnet.

We need both to vpn back to Home Office for data. The remotes say they are connected, but only 1 connects on the Home Office side.

The home office just gives error connecting. (all are using Sophos UTM)

We do NOT need satellite offices to exchange data at all and prefer they do not.

 

How would we configure this?

Thanks.



This thread was automatically locked due to age.
Parents

  • Hi Ray,

     

    I don't think that is possible without changing the subnets on one end as there will be two IPSec SA sharing the same subnets and posibility of a routing isssue. I will still discuss this with other heads, meanwhile lets wait for others to contribute to this thread.

    Thanks

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

Reply

  • Hi Ray,

     

    I don't think that is possible without changing the subnets on one end as there will be two IPSec SA sharing the same subnets and posibility of a routing isssue. I will still discuss this with other heads, meanwhile lets wait for others to contribute to this thread.

    Thanks

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

Children
No Data
Unfiltered HTML