Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 5 replies
  • Subscribers 16 subscribers
  • Views 6027 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Firewall not shown in ZTNA - Gateways

dirkkotte

Hi all,

I've used ZTNA with FW as gateway for one year.
After a license-issue, i am able to activate the 3 free licences and are able to reach central-ZTNA-configuration again.
My old config is there, but my current/active firewall is no longer available as "gateway". I see there only an intermediate test-firewall.
Ideas or hints?


THX Dirk



This thread was automatically locked due to age.
Parents
  • 0

    Hi Dirk,

    If I understand correctly, you had deployed a firewall as a ZTNA gateway previously. Now after activating this evaluation, you see your older gateway config but the previously chosen firewall serial number is not present in the gateway config? OR, are you unable to create a new gateway with a firewall? 

  • 0 in reply to Tejas Kashyap

    I see my older gateway config, but the previously chosen firewall serial number is not present in the gateway config. If i create a new gateway from type "firewall" it is the same. Only the "other" firewall-serial number ...


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0 in reply to dirkkotte

    Hi Dirk,

    Is the firewall managed by firewall, not just registered? You can check the status on the Firewall management page. 

    If yes, would it be possible to delete the older stale entry and add a new firewall gateway? 

Reply Children
Unfiltered HTML