Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 1 subscriber
  • Views 1538 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Short question about WAF and Exchange 2010

vwijhe
I would like to setup WAF for our Exchange services. I followed this article which I really appreciate: Secure Exchange Webservices with Sophos UTM WAF | Network Guy


If I read the article well, you need to have two public ip addresses configured for Exchange? One for autodiscover and one for the webservices? At the moment we have webmail and autodiscover going to the same public ip. 

Isn't not possible to activate two virtual servers on the same interface so I guess this is the only option, but I just want to verify this [:)]


This thread was automatically locked due to age.
Parents
  • 0
    Assuming that your domain is sloan.fam and that web1.sloan.fam and web2.sloan.fam both resolve to "UTM IP" in public DNS. Configure a Real Server for "Internal web server 1" and use it in a Virtual Server for the web1.sloan.fam FQDN.  Similarly for the other server and FQDN.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Assuming that your domain is sloan.fam and that web1.sloan.fam and web2.sloan.fam both resolve to "UTM IP" in public DNS. Configure a Real Server for "Internal web server 1" and use it in a Virtual Server for the web1.sloan.fam FQDN.  Similarly for the other server and FQDN.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML