Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 1 subscriber
  • Views 1539 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Short question about WAF and Exchange 2010

vwijhe
I would like to setup WAF for our Exchange services. I followed this article which I really appreciate: Secure Exchange Webservices with Sophos UTM WAF | Network Guy


If I read the article well, you need to have two public ip addresses configured for Exchange? One for autodiscover and one for the webservices? At the moment we have webmail and autodiscover going to the same public ip. 

Isn't not possible to activate two virtual servers on the same interface so I guess this is the only option, but I just want to verify this [:)]


This thread was automatically locked due to age.
Parents
  • 0
    Hi vwijhe,

    no you have 1 WAN IP address [:)] just point autodiscover. and owa. to that public and fixed IP address. It is possible to activate multiple virtual servers! The hostname decides the virtual server access.
Reply
  • 0
    Hi vwijhe,

    no you have 1 WAN IP address [:)] just point autodiscover. and owa. to that public and fixed IP address. It is possible to activate multiple virtual servers! The hostname decides the virtual server access.
Children
No Data
Unfiltered HTML