Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 1 subscriber
  • Views 10277 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Setting Up OWA and Outlook Anywhere

DingDuck
Hi All.

I'm a new Astaro user and am loving it so far.
I would like to know if there's a step by step guide on setting up OWA and OA so I can publish it to the outside world.

I currently have this in place on an ISA server but am not sure where to start with the Astaro appliance.

Appreciate any advice that you guys (and gals) can provide


This thread was automatically locked due to age.
Parents
  • 0
    The 'Hostname' of the Astaro should be the FQDN that resolves to the IP of the external interface of your Astaro.  Our standard is: mail.domainname.com.

    Put an additional address on the external interface named, for example: Outlook.  Have a new DNS record created that points to it.  Our standard is: outlook.domainname.com.

    Create a DNAT rule:

    Traffic Source:  Any 
    Traffic Service:  HTTPS
    Traffic Destination:  External [Outlook] (Address)
    NAT mode: DNAT (Destination)
    Destination: {Host definition of OWA/OMA server}
    Destination Service: {leave blank}
    Automatic packet filter rule: {checked}



    Create a DNS entry either in your internal DNS server or on the 'Static Entries' tab of 'DNS' in the Astaro: 'outlook.domainname.com -> {Host definition of OWA/OMA server}'.  Now you can access OWA from inside or outside with: https://outlook.domainname.com/exchange/

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson
    Thanks Bob
    I'll give this a go this evening when I'm home to see if it'll work [:)]
Reply Children
  • 0 in reply to DingDuck
    digging up an old thread here.
    I'm doing the same thing, using outlook anywhere for external users to connect (instead of using a VPN).
    Only problem is, i'm using the daily spam report but users can't release the mails because the spam report uses the internal ip address.
    How would I solve this?
Unfiltered HTML